华南理工大学学报(自然科学版) ›› 2007, Vol. 35 ›› Issue (11): 86-90.

• 化学化工 • 上一篇    下一篇

聚氨酯固化剂的合成与反应机理

胡孝勇 郭祀远 陈焕钦   

  1. 华南理工大学 轻工技术与工程学科博士后流动站,广东 广州 510640
  • 收稿日期:2006-11-21 出版日期:2007-11-25 发布日期:2007-11-25
  • 通信作者: 胡孝勇(1971-) ,男,副教授,博士,现在广西工学院生物与化学工程系任教,主要从事聚氨醋固化剂的合成与分离研究. E-mail:hxy_pym@sohu.com
  • 作者简介:胡孝勇(1971-) ,男,副教授,博士,现在广西工学院生物与化学工程系任教,主要从事聚氨醋固化剂的合成与分离研究.
  • 基金资助:

    广州市经委重大科技攻关项目(200210345) ;广西工学院博士科研启动基金资助项目(2005002)

Synthesis and Corresponding Mechanism of Polyurethane Curing Agent

Hu Xiao-yong  Guo Si-yuan  Chen Huan-qin   

  1. Postdoctoral Station of Light Industry Tech. and Engineering, South China Univ. of Tech. , Guangzhou 510640 , Guangdong , China
  • Received:2006-11-21 Online:2007-11-25 Published:2007-11-25
  • Contact: 胡孝勇(1971-) ,男,副教授,博士,现在广西工学院生物与化学工程系任教,主要从事聚氨醋固化剂的合成与分离研究. E-mail:hxy_pym@sohu.com
  • About author:胡孝勇(1971-) ,男,副教授,博士,现在广西工学院生物与化学工程系任教,主要从事聚氨醋固化剂的合成与分离研究.
  • Supported by:

    广州市经委重大科技攻关项目(200210345) ;广西工学院博士科研启动基金资助项目(2005002)

摘要: 采用FT-IR 分析技术对甲苯二异氰酸酯-三羟甲基丙烷(TDI-TMP) 团化剂合成反应体系在不同反应条件下得到的聚氨酯预聚物进行表征,发现在通常的工业合成条件下得到的聚氨酯预聚物有未反应的一OH 存在,而在高温合成条件下一OH 完全反应.结果表明TMP 的实际官能度与反应条件有关.从反应机理的角度,分析并发现空间位阻和反应的不确定性是导致较低温度下是基反应不完全和国产.合成固化剂储存时间短的原因.最后提出了合成聚氨酯预聚物的工艺,采用该工艺所合成的聚氨酯预聚物分子结构较理想,且合成体系中残留的TDI 可用薄膜蒸发器进行分离回收.

关键词: 聚氨酯, 薄膜蒸发, 甲苯二异氰酸酯, 固化剂, 三羟甲基丙烷, 合成, 聚氨酯预聚物

Abstract:

The reaction systems of toluene diisocyanate-trihydroxymethyl propane (TDI -TMP) were studied under different conditions for the preparation of polyurethane curing agent , and the products were eharacterized hy means of Ff-IR. It is found that there are some unreacted hydroxyl groups (-OH) in polyurethane prepolymer under normal conditions , hut the hydroxyl groups thoroughly join the reaction at a higher temperature. This means that the functionality of TMP is related to the reaction conditions. Moreover, hy analyzing the synthesis mechanism , it is revealed that the spatial steric hindrance and the indefinahle reaction of hydroxyl groups are the reasons for the incomplete reaction of -OH and the short storage period of the curing agent made in China. The authors finally present a technology to synthesize polyurethane prepolymer, from which ideal molecular structure can he obtained and the TDI residual in reaction system can be separated hy a thin-film evaporator.

Key words: polyurethane, thin-film evaporation, toluene diisocyanate, curing agent, trihydroxymethyl propane, synthesis, polyurethane prepolymer