华南理工大学学报(自然科学版) ›› 2013, Vol. 41 ›› Issue (11): 73-78.doi: 10.3969/j.issn.1000-565X.2013.11.012

• 机械工程 • 上一篇    下一篇

随机参数激励下齿轮系统的分岔与稳定性

王靖岳1 郭立新1 王浩天2   

  1. 1.东北大学 机械工程与自动化学院,辽宁 沈阳 110819; 2.沈阳航空航天大学,辽宁 沈阳 110136
  • 收稿日期:2013-05-12 修回日期:2013-07-13 出版日期:2013-11-25 发布日期:2013-10-11
  • 通信作者: 王靖岳(1978-),男,博士生,沈阳理工大学副教授,主要从事车辆系统动力学与控制、非线性振动与控制研究. E-mail:abswell@126.com
  • 作者简介:王靖岳(1978-),男,博士生,沈阳理工大学副教授,主要从事车辆系统动力学与控制、非线性振动与控制研究.
  • 基金资助:

    国家自然科学基金资助项目(51275082);辽宁省教育厅科技研究项目(L2012068)

Bifurcation and Stability of Gear System with Random Parameter Excitation

Wang Jing- yue1 Guo Li- xin1 Wang Hao- tian2   

  1. 1.School of Mechanical Engineering and Automation,Northeastern University,Shenyang 110819,Liaoning,China;2.Shenyang Aerospace University,Shenyang 110136,Liaoning,China
  • Received:2013-05-12 Revised:2013-07-13 Online:2013-11-25 Published:2013-10-11
  • Contact: 王靖岳(1978-),男,博士生,沈阳理工大学副教授,主要从事车辆系统动力学与控制、非线性振动与控制研究. E-mail:abswell@126.com
  • About author:王靖岳(1978-),男,博士生,沈阳理工大学副教授,主要从事车辆系统动力学与控制、非线性振动与控制研究.
  • Supported by:

    国家自然科学基金资助项目(51275082);辽宁省教育厅科技研究项目(L2012068)

摘要: 综合考虑由扭矩波动引起的低频外激励和齿轮阻尼比、齿侧间隙、啮合频率、啮合刚度的随机扰动等因素,基于牛顿定律建立了单对三自由度直齿齿轮系统的随机振动方程,利用 Runge- Kutta 法对运动微分方程进行了求解,采用系统的分岔图、相图、时间历程图和Poincaré 映射图分析了齿轮系统在啮合频率变化下的分岔特性与稳定性,并分析了啮合频率的随机扰动对系统分岔特性的影响.数值仿真表明: 随机非光滑齿轮系统存在丰富的倍周期分岔现象,随着齿轮啮合频率的减小,齿轮系统通过周期倍化分岔从周期运动通向混沌运动; 通过剔除 6 处不稳定转速区段,可获得无量纲啮合频率在 0.1 ~6.0 之间的稳定速度区段; 系统的运动对啮合频率的随机扰动极其敏感,建模时要考虑其大小的影响.

关键词: 齿轮系统, 随机扰动, 混沌, 分岔, 稳定性

Abstract:

By considering the random disturbances caused by the low- frequency internal excitation of torque fluctua-tion,damping ratio,gear backlash,meshing frequency and meshing stiffness,the random vibration equations of asingle pair of spur gear system with three degrees of freedom are established based on Newton's law.Then,the mo-tion differential equations are solved by means of the Runge- Kutta method,and the bifurcation and stability of thegear system with varying gear meshing frequency are analyzed according to the bifurcation diagram,phase diagram,time course diagram and Poincaré mapping graph of the system.Finally,the effect of the random disturbance ofmeshing frequency on the system dynamics is investigated.Numerical simulation results show that (1) there existsabundant period- doubling bifurcation in the random non- smooth gear system; (2) with the decrease of meshing fre-quency,the periodic motion of gear system becomes chaotic via the period- doubling bifurcation; (3) by eliminating6 unstable speed sections,a stable speed section can be obtained in a dimensionless meshing frequency range from0.1 to 6.0; and (4) as the system motion is extremely sensitive to the random disturbance of meshing frequency,the influence degree should be taken into consideration during the system modeling.

Key words: gear system, random disturbance, chaos, bifurcation, stability