Journal of South China University of Technology (Natural Science Edition) ›› 2020, Vol. 48 ›› Issue (11): 80-86.doi: 10.12141/j.issn.1000-565X.200199

• Mechanical Engineering • Previous Articles     Next Articles

Research on Dynamic Characteristics of a Double Roller Tripod Joint

QIU Yinyuan1,2 ZHEN Ran3 LI Ruilong3 SHANGGUAN Wenbin1   

  1. 1. School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China; 2. School of Mechanical and Automotive Engineering,Fujian University of Technology,Fuzhou 350118,Fujian,China; 3. Shandong Meichen Industry Group Co. ,Ltd. ,Weifang 262200,Shandong,China
  • Received:2020-04-27 Revised:2020-05-15 Online:2020-11-25 Published:2020-11-05
  • Contact: 上官文斌(1963-),男,博士,教授,主要从事汽车振动控制研究。 E-mail:sgwb@scut.edu.cn
  • About author:邱胤原(1990-),男,博士生,主要从事汽车万向节和传动系统研究。E-mail: yinyuan102@126. com
  • Supported by:
    Supported by the National Natural Science Foundation of China (51975217)

Abstract: The multi-body dynamic model of a double roller tripod joint was established,and the dynamic forces generated during its working process were analyzed. The generated axial force and high frequency plunging force were tested,and the comparison between the calculation results and the test results verifies the correctness of the model. Based on the established model,the dynamic characteristics of a tripod joint and double roller tripod joint were compared. The results show that the axial generated force of a double roller tripod joint is reduced by 80%,and the high frequency plunging force is reduced by 50%.

Key words: tripod joint, double roller, dynamics, generated axial force, high frequency plunging force