华南理工大学学报(自然科学版) ›› 2022, Vol. 50 ›› Issue (3): 119-126.doi: 10.12141/j.issn.1000-565X.210409
所属专题: 2022年机械工程
吴上生1 陈柘2 周运岐3
WU Shangsheng1 CHEN Zhe2 ZHOU Yunqi3
摘要: 为了研究剪式可展单元在振动工况下的响应特性,将船舶除锈装置作为振动源,首先建立剪式可展单元力学模型,并研究极限工况下单元杆件的可靠性;采用数值模态分析方法、随机振动下动应力测试分析方法,研究剪式可展单元在振动工况下产生的随机激励问题及其响应;提出消除剪式可展单元二阶横弯振动与激励共振的方法,并对各结构优化方案进行动应力仿真。结果表明,剪式可展单元二阶模态振动(306.15Hz)和除锈产生的随机激励共振是引起剪式可展单元振动疲劳的主要原因;将上工作台厚度从10mm增加到14mm,上工作台刚度从20GPa降低到19.5GPa,同时在两连杆之间加上连接轴,降低单元动应力水平最为明显。论文研究结果可为剪式可展单元在工程应用中稳定可靠工作提供理论基础。
中图分类号: