基于数据包络的松拉刀机构故障模式风险分析

doi:10.3969/j.issn.1000-565X.2015.07.020

华南理工大学学报（自然科学版） ›› 2015, Vol. 43 ›› Issue (7): 142-146.doi: 10.3969/j.issn.1000-565X.2015.07.020

• 机械工程 • 上一篇

基于数据包络的松拉刀机构故障模式风险分析

王志琼¹申桂香¹张英芝¹谷东伟^2†张立敏^1,2

1．吉林大学机械科学与工程学院，吉林长春 130022; 2．长春工业大学机电工程学院，吉林长春 130012

收稿日期:2014-05-14 修回日期:2014-06-25 出版日期:2015-07-25 发布日期:2015-06-03
通信作者: 谷东伟( 1983-) ，男，讲师，主要从事数控机床可靠性、维修性研究． E-mail:gdw2000@163.com
作者简介:王志琼( 1986-) ，女，工程师，主要从事数控机床全寿命周期研究． E-mail: wzq2012@jlu.edu.cn
基金资助:
国家科技重大专项(2010ZX04014-011) ; 国家自然科学基金资助项目(51275205) ; 吉林省科技发展计划项目(20140520126JH， 20125008)

Risk Analysis of Failure Mode of Clamping and Releasing Tool Based on Data Envelopment Analysis

Wang Zhi-qiong¹ Shen Gui-xiang¹ Zhang Ying-zhi¹ Gu Dong-wei² Zhang Li-min^1,2

1. School of Mechanical Science and Engineering, Jilin University, Changchun 130022, Jilin, China; 2. School of Mechatronic Engineering, Changchun University of Technology, Changchun 130012, Jilin, China

Received:2014-05-14 Revised:2014-06-25 Online:2015-07-25 Published:2015-06-03
Contact: 谷东伟( 1983-) ，男，讲师，主要从事数控机床可靠性、维修性研究． E-mail:gdw2000@163.com
About author:王志琼( 1986-) ，女，工程师，主要从事数控机床全寿命周期研究． E-mail: wzq2012@jlu.edu.cn
Supported by:
Supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(2010ZX04014-011) , the National Natural Science Foundation of China(51275205) and the Program of Science and Technology Development of Jilin Province(20140520126JH, 20125008)

摘要/Abstract

摘要： 针对风险优先数分析法中各评价指标权重相同，且对相同风险优先数(RPN) 无法进行风险排序的问题，将数据包络法和风险优先数分析法进行融合，对松拉刀机构的故障模式进行风险分析．该方法能够增加RPN 分析的区别力，客观寻找故障模式排序方法，确定松拉刀机构各故障模式的风险等级，有利于设计人员优先处理最危险的故障，为实现功能部件可靠性分配以及提高松拉刀机构的可靠性提供依据．

关键词: 松拉刀机构, 故障风险分析, 数据包络分析

Abstract: In the risk priority number (RPN) analysis, each evaluation index weight is the same, and it is impossible to conduct risk ranking for the same RPN value. In view of the above issues, the data envelopment analysis (DEA) and the risk priority number analysis are combined to analyze the failure mode risks of clamping and releasing tools. This method can increase the distinction of RPN, objectively search the failure mode ranking method and determine the risk grades of various failure modes of clamping and releasing tools. Therefore, it is beneficial for the designer to preferentially handle the most dangerous failure mode and can provide a basis for realizing the reliability allocation of function parts and improving the reliability of clamping and releasing tools.

Key words: clamping and releasing tool, failure risk analysis, data envelopment analysis

中图分类号:

TG659，TB114.3

王志琼申桂香张英芝谷东伟张立敏. 基于数据包络的松拉刀机构故障模式风险分析[J]. 华南理工大学学报（自然科学版）, 2015, 43(7): 142-146.

Wang Zhi-qiong Shen Gui-xiang Zhang Ying-zhi Gu Dong-wei Zhang Li-min.

Risk Analysis of Failure Mode of Clamping and Releasing Tool Based on Data Envelopment Analysis

[J]. Journal of South China University of Technology (Natural Science Edition), 2015, 43(7): 142-146.

[1]	张英芝, 翟粉莉, 郑玉彬, 等. 基于累积误差平方和最小的参数估计方法[J]. 华南理工大学学报（自然科学版）, 2020, 48(11): 49-54.
[2]	陈炳锟张英芝申桂香秦猛猛. 基于模糊证据理论的储刀选刀系统故障率评估[J]. 华南理工大学学报（自然科学版）, 2019, 47(5): 81-88.
[3]	张春华李迪翟振坤王世勇. 时延网络化数控系统的建模与加工性能[J]. 华南理工大学学报（自然科学版）, 2013, 41(11): 96-101.

基于数据包络的松拉刀机构故障模式风险分析

Risk Analysis of Failure Mode of Clamping and Releasing Tool Based on Data Envelopment Analysis

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价