剩余压紧力条件下滑靴副的油膜特性及功耗

doi:10.3969/j.issn.1000-565X.2011.01.021

华南理工大学学报（自然科学版） ›› 2011, Vol. 39 ›› Issue (1): 111-116.doi: 10.3969/j.issn.1000-565X.2011.01.021

剩余压紧力条件下滑靴副的油膜特性及功耗

孙毅^1,2 姜继海^1,2 刘成强^1,2

1．哈尔滨工业大学机电工程学院，黑龙江哈尔滨150080；2．浙江大学流体传动及控制国家重点实验室，浙江杭州310027

收稿日期:2010-06-23 修回日期:2010-08-19 出版日期:2011-01-25 发布日期:2010-12-01
通信作者: 孙毅(1979一)，男，博士生，主要从事液压元件的优化与设计研究 E-mail:gongsunyi2005@163.com
作者简介:孙毅(1979一)，男，博士生，主要从事液压元件的优化与设计研究
基金资助:
国家自然科学基金资助项目(50875054)；浙江大学流体传动及控制国家重点实验室开放基金资助项目(GZKF一2008003)

Oil Film Characteristics and Power Consumption of Slipper Pair Under Redundant Pressing Force

Sun Yi^1,2 Jiang Ji-hai^1,2 Liu Cheng-qiang^1,2

1.Harbin industrial university mechanical and electrical engineering institute, heilongjiang Harbin 150080; 2.Zhejiang university fluid transmission and control national key laboratory, zhejiang hangzhou 310027

Received:2010-06-23 Revised:2010-08-19 Online:2011-01-25 Published:2010-12-01
Contact: 孙毅(1979一)，男，博士生，主要从事液压元件的优化与设计研究 E-mail:gongsunyi2005@163.com
About author:孙毅(1979一)，男，博士生，主要从事液压元件的优化与设计研究
Supported by:
国家自然科学基金资助项目(50875054)；浙江大学流体传动及控制国家重点实验室开放基金资助项目(GZKF一2008003)

摘要/Abstract

摘要： 在考虑滑靴高速旋转时底面会形成热楔支承力的基础上,利用求解高次微分方程的研究方法建立了剩余压紧力状态下柱塞泵的滑靴底面的油膜模型,通过Matlab编程精确描述了剩余压紧力状态下滑靴油膜的动态特性,并以此为基础研究了滑靴的油膜厚度与负载、转速的关系,推导了滑靴高速运行所造成的功耗损失,同时分析了负载和转速变化对滑靴功耗损失的影响,并对二者的影响进行了比较.结果表明：转速的提高不仅会增大剪切流的损失,而且会增大压差流的损失,因此相对于负载的影响,转速对功耗损失的影响要大很多.

关键词: 热楔支承力, 油膜特性, 功耗

Abstract:

In the consideration of the supporting force of wedge due to the high-speed rotation of the slipper,a model describing the oil film under the slipper of the piston pump in the presence of redundant pressing force is crea-ted by solving high-degree differential equations.Then,the dynamic characteristics of the oil film under above-mentioned conditions are described through Matlab programming.Moreover,the relationship between the oil film thickness and the load as well as the rotating speed is discussed,and the power losses of the slipper respectively due to the variations of load and rotating speed are analyzed and compared.The results indicate that the rotating speed affects the power loss more greatly than the load because the increase in rotating speed may result in the increase of not only the shear flow loss but also the pressure difference loss.
{Date}: 2011-04-18

Key words: Wedged supporting force caused by heat, Oil film characteristics, Power consumption

孙毅姜继海刘成强. 剩余压紧力条件下滑靴副的油膜特性及功耗[J]. 华南理工大学学报（自然科学版）, 2011, 39(1): 111-116.

Sun Yi Jiang Ji-hai Liu Cheng-qiang. Oil Film Characteristics and Power Consumption of Slipper Pair Under Redundant Pressing Force[J]. Journal of South China University of Technology (Natural Science Edition), 2011, 39(1): 111-116.

[1]	李晶陈昊訚耀保. 轴向柱塞泵柱塞副偏心状态油膜特性分析[J]. 华南理工大学学报（自然科学版）, 2016, 44(10): 30-35,42.
[2]	孙毅姜继海刘军龙 . 柱塞泵滑靴卡盘与球头的相对位置及摩擦功耗[J]. 华南理工大学学报（自然科学版）, 2011, 39(4): 82-87.
[3]	魏建军. 快速锁定的低功耗电荷泵锁相环[J]. 华南理工大学学报（自然科学版）, 2009, 37(9): 71-76.
[4]	蔡敏舒俊. 低电压、低功耗CMOS基准电压源的设计[J]. 华南理工大学学报（自然科学版）, 2008, 36(9): 128-131.

剩余压紧力条件下滑靴副的油膜特性及功耗

Oil Film Characteristics and Power Consumption of Slipper Pair Under Redundant Pressing Force

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价