Journal of South China University of Technology (Natural Science Edition) ›› 2010, Vol. 38 ›› Issue (10): 153-156.doi: 10.3969/j.issn.1000-565X.2010.10.028

• Power & Electrical Engineering • Previous Articles    

Numerical Simulation and Analysis of Incineration Blending Waste-Water Sludge in a Pulverized Coal Combustion Boiler

Lou Bo  Wang Fang  Peng Xiao-jun   

  1. School of Electric Power,South China University of Technology,Guangzhou 510640,Guangdong,China
  • Received:2010-01-14 Revised:2010-02-16 Online:2010-10-25 Published:2010-10-25
  • Contact: 楼波（1965-），男，博士，副教授，主要从事燃烧技术与环境保护研究． E-mail:loubo@scut．edu．cn
  • About author:楼波（1965-），男，博士，副教授，主要从事燃烧技术与环境保护研究．
  • Supported by:

    广东省科技计划项目（2008B080701004）

PDF

1086

Abstract:

In this paper,with the help of Fluent,the incineration blending wastewater sludge in a pulverized coal combustion boiler in an electric power plant in Guangdong is numerically simulated and analyzed,and the distributions of the velocity field and the temperature field are discussed.Simulated results show that,with the increase of wastewater sludge dosage,the highest temperature in the furnace is 80~160 K lower than that of single pulverized coal combustion,and the height corresponding to the highest temperature increases by 180~800 mm.Experimental results indicate that,when the moisture content of the sludge is lower than 20%,the proper dosage of blended sludge should be kept within 10%.

Key words: wastewater sludge, pulverized coal combustion boiler, blending incineration, numerical simulation