Simulation Method of Spinning Forming of Multi-Wedge Belt Wheel as Engine Accessory

doi:10.3969/j.issn.1000-565X.2016.03.012

Journal of South China University of Technology (Natural Science Edition) ›› 2016, Vol. 44 ›› Issue (3): 81-88.doi: 10.3969/j.issn.1000-565X.2016.03.012

• Automotive Engineering • Previous Articles Next Articles

Simulation Method of Spinning Forming of Multi-Wedge Belt Wheel as Engine Accessory

WAN Li-xiang¹ ZHENG Bang-zhi¹ SHANGGUAN Wen-bin^2,3 WU Qi-hong³

1.School of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,Sichuan,China; 2.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China; 3.Ningbo Tuopu Group Co.,Ltd.,Ningbo 315800,Zhejiang,China

Received:2015-08-23 Revised:2015-11-18 Online:2016-03-25 Published:2016-02-02
Contact: 上官文斌(1963-)，男，博士，教授，主要从事汽车振动分析与控制、橡胶隔振器振动控制和疲劳特性研究． E-mail:shangguanwb99@tsinghua.org.cn
About author:万里翔(1965-)，男，博士，副教授，主要从事现代汽车设计理论、汽车节能与环保、汽车结构优化与节能控制研究．E-mail:wanlx@ home． swjtu． edu． cn
Supported by:
Supported by the National Natural Science Foundation of China(51275175)

Abstract

Abstract: Firstly,a simulation model to describe the spinning forming process of multi-wedge belt wheel is estab- lished,with its correctness and validity being verified by means of system energy method and according to wheel force as well as equivalent plastic strain (PEEQ) of each step.Secondly,by analyzing the distribution of equiva- lent strain of each step,the laws of material forming and flow in each step are discussed.Then,aiming at the de- fects of a practical product,an analysis of forming process is made in a simulative way,and the results are finally compared with the actual forming results.It is found that the proposed simulation method is available for analyzing the spinning forming of multi-wedge belt wheel.

Key words: engine, multi-wedge belt wheel, spinning, forming, model verification, practical application

CLC Number:

U270.6+4

WAN Li-xiang ZHENG Bang-zhi SHANGGUAN Wen-bin WU Qi-hong. Simulation Method of Spinning Forming of Multi-Wedge Belt Wheel as Engine Accessory[J]. Journal of South China University of Technology (Natural Science Edition), 2016, 44(3): 81-88.

[1]	LEI Yu, HUANG Yifan, LUO Xuedong, et al.. Prediction of Soil Thermal Conductivity Based on NMI-FA-DELM Model [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(9): 129-138.
[2]	ZHAO Xiaomei, ZHU Xiangyuan, WANG Qin, et al. Operational Reliability Optimization Strategies of Multi-type Bus Lines [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(8): 32-39.
[3]	WANG Linhong, LI Hongtao, LI Ruonan. Design of Speed Limit at Expressway in Rainy Day Considering Drivers’ Visual Search Ability [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(6): 20-29.
[4]	MA Shuhong, YANG Lei, CHEN Xifang. Resilience Evolution of Multi-mode Transportation Network in Urban Agglomeration Based on Risk Diffusion [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(6): 42-51.
[5]	WU Shangsheng, HUANG Tiexiang . Thermodynamic Analysis of Low Temperature Differential Stirling Engine [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(2): 47-53.
[6]	LENG Sheng, FU Youwei, MA Wantai, et al. Study on the Morphology Control Technology of Spray Forming Ingot Billets Based on GA-BP Neural Network [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(2): 27-34.
[7]	MAO Xuesong, WANG Yueyue, WU Qian, et al. Structure Evolution Law of Soil-Rock Mixture Fillers with Different Gradations Under Seepage [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(2): 65-75.
[8]	YU Bin, ZHANG Yuqin, WANG Yuchen, et al. Automated Extraction of Road Geometry Information Using Mobile LiDAR Point Cloud [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(2): 88-99.
[9]	LI Junye, TIAN Gongqiang, WANG Xinpeng, et al. Research on Forming Characteristics of Conductive Slip Ring Brush Wire by Finite Element Method [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(11): 140-150.
[10]	HU Yucong, WEI Hu, ZENG Qiang . Analysis of Freeway Crash Severity Based on Spatial Generalized Ordered Probit Model [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(1): 114-122.
[11]	XU Xiao, ZHANG Chuanyang, XIAO Gangfeng, et al. On the Mechanism of Multi-process Compound Spinning for Thin-walled Deep Cup Shaped Parts [J]. Journal of South China University of Technology(Natural Science Edition), 2022, 50(9): 109-115.
[12]	WENG Jiancheng, WANG Maolin, LIN Pengfei, et al. Cross-line Combined Bus Scheduling Optimization Method Based on Passenger Flow Characteristic Identification [J]. Journal of South China University of Technology(Natural Science Edition), 2022, 50(9): 39-48.
[13]	LU Kai, ZHAO Shijie, WU Huan, et al. Algebraic Method of Coordination Design for Bi-directional Red and Green Waves of Saturated Intersection [J]. Journal of South China University of Technology(Natural Science Edition), 2022, 50(9): 1-11.
[14]	ZHANG Chi, REN Shipeng, WANG Bo, et al. Speed Characteristics and Prediction of Trucks on Long and Steep Downgrade Sections [J]. Journal of South China University of Technology(Natural Science Edition), 2022, 50(3): 38-49.
[15]	LU Kai, WU Wei, DENG Xingdong, et al. Composition and Optimization Method of Coordination Path Set in Control Subarea [J]. Journal of South China University of Technology(Natural Science Edition), 2022, 50(2): 1-14.

Simulation Method of Spinning Forming of Multi-Wedge Belt Wheel as Engine Accessory

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments