Numerical Simulation of Electromechanical Coupling Response of Nano Flexoelectric Structures

doi:10.12141/j.issn.1000-565X.220835

Abstract

Abstract:

At the micro-nano scale, the flexoelectric effect exhibits a higher electromechanical coupling conversion efficiency in comparison with the traditional piezoelectric effect. Therefore, it holds potential applications in the fields of sensing, actuation, and energy harvesting. However, most commercially available finite element analysis software packages lack the flexoelectric constitutive model, rendering it impossible to perform a precise numerical simulation of flexoelectric structures. Therefore, this study incorporated the flexoelectric effect into the calculation model based on the development of Abaqus user-defined element (UEL) subroutine. Additionally, we derived the electromechanical coupling equations of the flexoelectric structure and developed a flexoelectric element in Abaqus, which provides numerical simulation technology for analyzing the structural flexoelectric response. Compared with the traditional mixed finite element method (MFEM), this proposed method has the advantages of easier modeling, high efficiency and low computational cost. And its deflection and electric field strength metrics are closer to the analytical solution than either of the other methods. Then, using this numerical simulation method, this study established a flexoelectric structural response analysis numerical model, conducted force-electromechanical coupling response calculations, and analyzed straight and curved beams under different boundary conditions. The analysis results show the mechanism of the geometric parameters of the beam affects the structural strain gradient, and show that the output voltage can be controlled by controlling the deformation gradient when designing a flexoelectric beam using the same material. It is shown that changing the degree of bending of the beam is effective in increasing the open-circuit voltage of the beam output and reducing the deflection of the beam. The open-circuit voltage of a curved cantilever beam bent downward is greater than the open-circuit voltage of a curved cantilever beam bent upward for the same degree of bending. When the circular arc angle of the upward bending curved beam is 38°, the left edge is a sliding bearing, and the right edge is a hinge bearing, the open-circuit voltage is the maximum, up to 214.07 mV, which is five times more than that of the cantilevered rectangular beam. In addition, by considering the piezoelectric effect alone, the open-circuit voltage will decrease by 89.3% in the same model.

Key words: flexoelectric effect, curved beam, secondary development, finite element simulation

CLC Number:

O411.3

HUANG Huaiwei, HUANG Haibo. Numerical Simulation of Electromechanical Coupling Response of Nano Flexoelectric Structures[J]. Journal of South China University of Technology(Natural Science Edition), 2024, 52(1): 147-156.

Figures/Tables 11

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

References 24

1	MERUPO V I， GUIFFARD B， SEVENO R，et al ．Flexoelectric response in soft polyurethane films and their use for large curvature sensing［J］．Journal of Applied Physics，American Institute of Physics，2017，122（14）：144101/1-9.
2	ZHANG S， LIU K， XU M，et al ．A curved resonant flexoelectric actuator［J］．Applied Physics Letters，American Institute of Physics，2017，111（8）：082904/1-5.
3	LIU Q， ZHANG Y， GAO J，et al ．Practical high-performance lead-free piezoelectrics：structural flexibility beyond utilizing multiphase coexistence［J］．National Science Review，2020，7（2）：355-365.
4	GOHARI H D， ZARASTVAND M R， TALEBITOOTI R，et al ．Radiated sound control from a smart cylinder subjected to piezoelectric uncertainties based on sliding mode technique using self-adjusting boundary layer［J］．Aerospace Science and Technology，2020，106：106141/1-12.
5	MINDLIN R D ．Polarization gradient in elastic dielectrics［M］．Vienna：Springer，1972.
6	MAUGIN G A ．The method of virtual power in continuum mechanics：application to coupled fields［J］．Acta Mechanica，1980，35（1）：1-70.
7	MARANGANTI R， SHARMA N D， SHARMA P ．Electromechanical coupling in nonpiezoelectric materials due to nanoscale nonlocal size effects：Green’s function solutions and embedded inclusions［J］．Physical Review B，American Physical Society，2006，74（1）：014110/1-14.
8	SAHIN E， DOST S ．A strain-gradients theory of elastic dielectrics with spatial dispersion［J］．International Journal of Engineering Science，1988，26（12）：1231-1245.
9	KALPAKIDES V K， AGIASOFITOU E K ．On material equations in second gradient electroelasticity［J］．Journal of Elasticity and the Physical Science of Solids，2002，67（3）：205-227.
10	SHEN S， HU S ．A theory of flexoelectricity with surface effect for elastic dielectrics［J］．Journal of the Mechanics and Physics of Solids，2010，58（5）：665-677.
11	ABDOLLAHI A， PECO C， MILLÁN D，et al ．Computational evaluation of the flexoelectric effect in dielectric solids［J］．Journal of Applied Physics，American Institute of Physics，2014，116（9）：093502/1-10.
12	GHASEMI H， PARK H， ZHUANG X，et al ．Three-dimensional isogeometric analysis of flexoelectricity with MATLAB Implementation［J］．Computers，Materials & Continua，2020，65（2）：1157-1179.
13	YVONNET J， LIU L P ．A numerical framework for modeling flexoelectricity and Maxwell stress in soft dielectrics at finite strains［J］．Computer Methods in Applied Mechanics and Engineering，2017，313（1）：450-482.
14	MAO S， PUROHIT P K， ARAVAS N ．Mixed finite-element formulations in piezoelectricity and flexoelectricity［J］．Proceedings of the Royal Society A：Mathematical，Physical and Engineering Sciences，2016，472（2190）：20150879/1-19.
15	DENG F， DENG Q， YU W，et al ．Mixed finite elements for flexoelectric solids［J］．Journal of Applied Mechanics，2017，84（8）：081004/1-12.
16	ZHENG Y， CHU L，DUI G，et al ．Modeling and simulation of functionally graded flexoelectric micro-cylinders based on the mixed finite element method［J］．Applied Physics A，2021，127（2）：153/1-16.
17	TIAN X， SLADEK J， SLADEK V，et al ．A collocation mixed finite element method for the analysis of flexoelectric solids［J］．International Journal of Solids and Structures，2021，217：27-39.
18	FAROUGHI S， ROJAS E F， ABDELKEFI A，et al ．Reduced-order modeling and usefulness of non-uniform beams for flexoelectric energy harvesting applications［J］．Acta Mechanica，2019，230（7）：2339-2361.
19	HOSSEINI S A H， RAHMANI O ．Free vibration of shallow and deep curved FG nanobeam via nonlocal Timoshenko curved beam model［J］．Applied Physics A，2016，122（3）：169.
20	AREFI M， RABCZUK T ．A nonlocal higher order shear deformation theory for electro-elastic analysis of a piezoelectric doubly curved nano shell［J］．Composites Part B：Engineering，2019，168（2019）：496-510.
21	SLADEK J， SLADEK V， HOSSEINI S M ．Analysis of a curved Timoshenko nano-beam with flexoelectricity［J］．Acta Mechanica，2021，232（4）：1563-1581.
22	TAHAEI YAGHOUBI S， MOUSAVI S M， PAAVOLA J ．Buckling of centrosymmetric anisotropic beam structures within strain gradient elasticity［J］．International Journal of Solids and Structures，2017，109：84-92.
23	HU S， SHEN S ．Electric field gradient theory with surface effect for nano-dielectrics［J］．Computers，Materials and Continua，2009，13（1）：63-87.
24	ZHANG R， LIANG X， SHEN S ．A Timoshenko dielectric beam model with flexoelectric effect［J］．Meccanica，2016，51（5）：1181-1188.

[1]	ZHAO Xuefeng, YOU Ke, YUAN Yin, et al. Simulation and Experimental Research on Dual-Disk Magnetic Preparation Based on Magneto-Elastic Abrasive [J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(5): 130-140.
[2]	ZHANG Jin, LIU Delong, ZHANG Qiang, et al. Fire Resistance Test and Numerical Simulation of Cross-Laminated Timber Wall [J]. Journal of South China University of Technology (Natural Science Edition), 2021, 49(4): 9-19.
[3]	SHI Kairong PAN Wenzhi JIANG Zhengrong Lü Junfeng LUO Bin . Mechanical Behaviors of Large-tonnage Complex Steel Spherical Hinged Support: Rotation Behavior Subjected to Axial Compressive Load [J]. Journal of South China University of Technology(Natural Science Edition), 2019, 47(8): 9-15.
[4]	LI Min TAN Meng SHANGGUAN Wenbin LI Zhichao LIU Jie YOU Limin. A Method to Analyze and Optimize Assembly Performance of Outer Seals of Car Window Belt-Line [J]. Journal of South China University of Technology (Natural Science Edition), 2018, 46(5): 117-124.
[5]	HE Zhan-shu ZHANG Yuan-xi WANG Pei-zhuo TANG Yong SHAO Li-na. Insertion-Extraction and Temperature Rise Properties of Electrical Connector [J]. Journal of South China University of Technology (Natural Science Edition), 2017, 45(4): 59-65,80.
[6]	LIU Gang WANG Peng-yu WANG Zhen-hua XU Tao LIU Yi-gang HAN Zhuo-zhan. Determination Method of Current-Carrying Capacity of HVAC Cable Joint Based on ANSYS [J]. Journal of South China University of Technology (Natural Science Edition), 2017, 45(4): 22-29.
[7]	ZANG Meng-yan SHI Fang. Simulation Investigation into Crash Performances of Vehicle Child Safety Seat [J]. Journal of South China University of Technology (Natural Science Edition), 2017, 45(2): 9-15.
[8]	XIA Qin-xiang LI Zhi-wei LONG Xiao-bin LONG Chuan. Investigation into Warpage Deformation and Corresponding Parameters in Expanding-Jointing Process of Air Conditioner Fin [J]. Journal of South China University of Technology (Natural Science Edition), 2016, 44(2): 33-39.
[9]	Zhou Jie Tao Ya-ping Zhang Jian-sheng Shao Chang-wei Luo Yan. Multi-Objective Optimization of Ｒoll Forgings of Coupler Yoke Based on MBC Toolbox [J]. Journal of South China University of Technology (Natural Science Edition), 2015, 43(11): 61-66.
[10]	Shi Bai-jun Li Zhen-yan Wu Si-chi. Intelligent Selection of Mould Based on Clinching of Plate [J]. Journal of South China University of Technology (Natural Science Edition), 2014, 42(12): 70-76.
[11]	Xu Yan Tan Jian- ping Wang Jun- feng Liu Yun- long Zhu Zhong- yan. Temperature Rise of Electromagnet of Large- Gap Magnetic Drive System [J]. Journal of South China University of Technology (Natural Science Edition), 2013, 41(11): 109-113.
[12]	Wu Chun-ling Ye Bang-yan . Investigation into Formation Mechanism of Nano-Crystalline/Ultra-Fine Grained Chip via Finite Element Method [J]. Journal of South China University of Technology (Natural Science Edition), 2010, 38(8): 78-82.
[13]	Xu Lan-ying Ye Bang-yan Wu Qiang Wang Wei-wen Lai Xing-yu Peng Rui-tao . Simulation and Experimental Investigation of Minipore Drilling of Austenitic Stainless Steel [J]. Journal of South China University of Technology (Natural Science Edition), 2008, 36(10): 120-124.