Finite Element Analysis of Interfaeial Stress During Tension of PP/CaCO3 Composite

Journal of South China University of Technology (Natural Science Edition) ›› 2006, Vol. 34 ›› Issue (10): 58-61.

• Materials Science & Technology • Previous Articles Next Articles

Finite Element Analysis of Interfaeial Stress During Tension of PP/CaCO₃ Composite

Liang Ji-zhao Wang Li

School of Industrial Equipment and Control Engineering,South China Univ.of Tech.,Guangzhou 5 10640.Guangdong,China

Received:2005-04-12 Online:2006-10-25 Published:2006-10-25
Contact: 梁基照(1953-)，男，教授，博士生导师，主要从事聚合物复合材料加工理论及机械设计研究 E-mail:scutjzl@sohu.com
About author:梁基照(1953-)，男，教授，博士生导师，主要从事聚合物复合材料加工理论及机械设计研究

Abstract

Abstract:

The finite element analysis(FEA)of the interfacial stress distribution during the tension of CaCO₃-filled polypropylene(PP)composite was carried out using the ANSYS software.The results of the 3D simulation were then compared with those of the 2D simulation.It is thus concluded that the shear effect subjected to the pole zone of CaCO₃ particles is maximal,and the tensile stress reaches the maximum in the equator zone because of the strong pressing and pulling due to the resin matrix.Moreover,the 3 D stress distribution is more undulant than the 2 D one.

Key words: polypropylene, calcium carbonate, tension, interfacial stress, finite element analysis

[1]	YU Xianbin, WANG Ronghui, CHEN Shanting, et al. High-Accuracy and Non-iteration Methods for Control Tension of Parallel-Strand Stay Cables [J]. Journal of South China University of Technology(Natural Science Edition), 2022, 50(7): 43-55.
[2]	LI Shuxun, YIN Huiquan, ZHAO Minjie, et al. Analysis of Bolt Pretension of LNG Ultra-Low Temperature Ball Valve [J]. Journal of South China University of Technology (Natural Science Edition), 2021, 49(7): 142-148.
[3]	CHEN Zhong XIE Shengyang ZHANG Xianmin. Design Of A Two DOF Hybrid Compliant Gripper Based On Electromagnetic Drive [J]. Journal of South China University of Technology(Natural Science Edition), 2021, 49(12): 35-42.
[4]	YANG Junmei LEI Yang CHEN Xikun. Speech Bandwidth Extension Based on Flatten-CNN [J]. Journal of South China University of Technology (Natural Science Edition), 2021, 49(11): 87-94.
[5]	CHEN Jianwen, GUAN Xiaoyu, ZHANG Ｒuonan, et al. Biaxial Tearing Behaviors and Mechanisms of Warp-Knitted Fabric Membranes Under Combined Shear and Tensile Stresses [J]. Journal of South China University of Technology (Natural Science Edition), 2021, 49(10): 78-86.
[6]	WANG Tichun HUA Yang QIN Jiaqi. Reasoning Model for Mechanical Product Scheme Design Based on Extensional Ontology Related Network [J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(9): 61-70.
[7]	ZANG Mengyan, WANG Lichen, ZHOU Tao, et al. Finite Element Simulation Analysis and Evaluation of Ｒadial Tire＇s Transient Dynamic Characteristics [J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(8): 124-129.
[8]	LI Fuhai, GAO Hao, WANG Jiangshan, et al. Experimental Study and Model Calculation on Crack Development of Polypropylene Fiber Ｒeinforced Concrete Beams [J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(7): 122-133.
[9]	JIN Xia, HU Juncong, WANG Wei, et al. Adjustment Strategy for Automobile Hood Matching in Virtual Environment [J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(6): 87-96.
[10]	WANG Tichun HUA Yang WU Yong. Extension Knowledge Push Model for Automobile Engine Design [J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(2): 107-115.
[11]	SHI Guangfeng HUO Mingjie WANG Zitao. Fluid-Solid Coupling Modal Analysis of Sessile Droplets [J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(2): 137-142,150.
[12]	SHI Xuefei, GAO Yi, CAO Shenghui. Experimental Study on Mechanical Behavior of UHPC Joint of Precast Bridge Deck [J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(12): 82-90,124.
[13]	GUO Wenlong SHAN Chenglin LIANG Peng. Study on Testing Mechanism and Application of Tension under Anchor for External Prestressing Strand by Ｒeverse Tension Method [J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(11): 10-18.
[14]	TANG Liang LI Yi ZHANG Zhirui CHENG Yiming SHANGGUAN Wenbin. Modal Analysis and Optimization of Vehicle Steering System [J]. Journal of South China University of Technology (Natural Science Edition), 2019, 47(9): 83-89.
[15]	XIA Ye, WANG Peng, LEI Wei, et al. Neutral Axis Position-Based Monitoring Method and Indicator for Structural Evaluation of Concrete Girder Bridges [J]. Journal of South China University of Technology (Natural Science Edition), 2019, 47(12): 62-71.

Finite Element Analysis of Interfaeial Stress During Tension of PP/CaCO₃ Composite

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments