华南理工大学学报(自然科学版) ›› 2006, Vol. 34 ›› Issue (7): 99-103.

• 土木建筑工程 • 上一篇    下一篇

高层钢筋混凝土剪力墙反应调整系数的分析

潘东辉1 蔡健1 林凡2   

  1. 1.华南理工大学 建筑学院,广东 广州 510640;2.华南理工大学 建筑设计研究院,广东 广州 510640
  • 收稿日期:2005-07-22 出版日期:2006-07-25 发布日期:2006-07-25
  • 通信作者: 潘东辉(1974-),男,工程师,博士生,主要从事高层建筑结构的研究. E-mail:pandh-scut@163.com
  • 作者简介:潘东辉(1974-),男,工程师,博士生,主要从事高层建筑结构的研究.
  • 基金资助:

    广东省自然科学基金资助项目(020965)

Analysis of Response Modification Factor of RC Shear Walls of Tall Buildings

Pan Dong-hui1  Cai Jian1  Lin Fan2   

  1. 1.College of Architecture and Civil Engineering,South China Univ.of Tech.,Guangzhou 510640,Guangdong,China; 2.Architectural Design and Research Institute,South China Univ.of Tech.,Guangzhou 510640,Guangdong,China
  • Received:2005-07-22 Online:2006-07-25 Published:2006-07-25
  • Contact: 潘东辉(1974-),男,工程师,博士生,主要从事高层建筑结构的研究. E-mail:pandh-scut@163.com
  • About author:潘东辉(1974-),男,工程师,博士生,主要从事高层建筑结构的研究.
  • Supported by:

    广东省自然科学基金资助项目(020965)

摘要: 为明确高层钢筋混凝土剪力墙的抗震能力,采用反应调整系数量化现有规范中剪力墙的设计构造措施,推导并计算了独立矩形悬臂剪力墙的超强系数和延性系数,从而确定了各抗震等级剪力墙的反应调整系数,再与设防地震和多遇地震的地震动比值相比较.结果表明,抗震等级、形状比、轴压比和墙体长度是剪力墙抗震能力的主要影响因素;为保证剪力墙的抗震性能,应限制墙的形状比.文中还提出了各抗震等级剪力墙的形状比限值和相应的设计建议.

关键词: 高层建筑, 钢筋混凝土结构, 剪力墙, 反应调整系数

Abstract:

The response modification factor is introduced to evaluate the seismic capacities of the reinforced con-crete(RC)shear walls of tall buildings,and to quantitatively articulate the seismic fortification measures pre-scribed by the China codes. The overstrength and ductility factors of an independent rectangular cantilever shear wall are also analyzed and calculated. Thus,the response modification factors for the shear walls with different seis-mic grades are determined,which are then compared with the ground motion ratio of the moderate intensity earth-quake to the frequently occurring earthquake. The results show that the seismic grade,the aspect ratio,the axial compression ratio and the wall length are the main variables affecting the seismic capacity,and that the aspect ratio should be limited to insure the seismic capacity. The limitation of aspect ratio and the corresponding design sugges-tions are finally proposed for the shear walls with different seismic grades.

Key words: tall building, reinforced concrete structure, shear wall, response modification factor