华南理工大学学报(自然科学版) ›› 2008, Vol. 36 ›› Issue (2): 29-34,47.

• 交通运输工程 • 上一篇    下一篇

一种快速测定二灰碎石强度的方法

王佳妮谭忆秋张淑娟白晶姜振军宋岩先4   

  1. 1. 哈尔滨工业大学 交通科学与工程学院, 黑龙江 哈尔滨 150090 ;2. 吉林省 交通科学研究所, 吉林 长春 130012; 3. 吉林省天达监理公司, 吉林 长春 130061; 4. 中国石油 辽河石化公司研究所, 辽宁 盘锦 124022  
  • 收稿日期:2007-04-11 修回日期:2007-06-13 出版日期:2008-02-25 发布日期:2008-02-25
  • 通信作者: 王佳妮(1975-),女,博士生,讲师,主要从事道路建筑材料研究. E-mail:wangjiani3328@126.com
  • 作者简介:王佳妮(1975-),女,博士生,讲师,主要从事道路建筑材料研究.
  • 基金资助:

    “十一五”国家科技支撑计划重点项目(2006BJ18B05);国家自然科学基金资助项目(5008005);教育部高等学校博士点专向科研基金资助项目(20060213002);教育部2006年度新世纪优秀人才支持计划(2006348)

A Method to Rapidly Measure Strength of Lime-flyash Treated Broken Stone

Wang Jia-ni1  Tan Yi-qiu1  Zhang Shu-juan2  Bai Jing2  Jiang Zhen-jun3  Song Yan-xian4   

  1. 1. School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, Heilongjiang, China; 2. Jilin Provincial Communication Scientific Research Institute, Changchun 130012, Jilin, China; 3. Jilin Provincial Tianda Management of Civil Engineering Company Ltd. , Changchun 130061, Jilin, China; 4. Petrochina Liaohe Petrochemical Company Institute, Panjin 124022, Liaoning, China
  • Received:2007-04-11 Revised:2007-06-13 Online:2008-02-25 Published:2008-02-25
  • Contact: 王佳妮(1975-),女,博士生,讲师,主要从事道路建筑材料研究. E-mail:wangjiani3328@126.com
  • About author:王佳妮(1975-),女,博士生,讲师,主要从事道路建筑材料研究.
  • Supported by:

    “十一五”国家科技支撑计划重点项目(2006BJ18B05);国家自然科学基金资助项目(5008005);教育部高等学校博士点专向科研基金资助项目(20060213002);教育部2006年度新世纪优秀人才支持计划(2006348)

摘要: 为解决二灰碎石按标准的方法进行强度试验时存在的因历时长而不便于指导施工的问题,文中提出了一种二灰碎石室内快速养生测强方法.该方法以负压饱水替代常压饱水,以60℃代替20℃的养生条件,通过统计拟合的方法建立快速养生方法与标准养生条件下的同批试件的强度关系,将检测时间由原来的7天缩短至10小时,形成了完整、系统的二灰碎石快速测强试验方法.在东北地区某实体工程中的应用表明,文中方法是有效的.

关键词: 二灰碎石, 强度, 快速测定, 负压饱水, 高温养生, 回归分析

Abstract:

The long duration of the conventional strength-measuring method for lime-flyash treated broken stone may result in some difficulties in construction. In order to solve this problem, a new method to rapidly measure the strength is proposed, in which the conventional natural-pressure saturation and the curing temperature of 20 ℃ are respectively substituted by the negative-pressure saturation and the temperature of 60 ℃, and the strength correlativity between the rapidly-cured and the standard samples is obtained by statistical fitting. As compared with the conventional method, the proposed method, which shortens the testing time from 7 d to 10 h, is more integrated and systematic. The effectiveness of the proposed method is finally verified by its application to a construction project in Northeastern China.

Key words: lime-flyash treated broken stone, strength, rapid measurement, negative-pressure saturation, hightemperature curing, regression analysis