成型中固体输送段聚合物的计算机层析测量

华南理工大学学报(自然科学版) ›› 2003, Vol. 31 ›› Issue (3): 6-10.

成型中固体输送段聚合物的计算机层析测量

李礼夫王博

华南理工大学交通学院广东广州510640

出版日期:2003-03-20 发布日期:2022-04-15
通信作者: 李礼夫（1955－）男副教授博士主要从事光机电测量和聚合物成型机理研究．
作者简介:李礼夫（1955－）男副教授博士主要从事光机电测量和聚合物成型机理研究．
基金资助:
国家自然科学基金资助项目（29874015）；广东省自然科学基金资助项目（980581）；教育部高等学校骨干教师基金资助项目

Polymer Measurement in Solid Conveying with Computed Tomography

Li Li-fu Wang Bo

College of Traffic and CommunicationsSouth China Univ．of Tech．Guangzhou510640China

Online:2003-03-20 Published:2022-04-15
Contact: Li Li-fu（born in1955）maleassociate professorPh．D．mainly researches on the optomechatro- nic measurement and polymer extrusion theory．
About author:Li Li-fu（born in1955）maleassociate professorPh．D．mainly researches on the optomechatro- nic measurement and polymer extrusion theory．
Supported by:
Supported by the National Natural Science Foundation of China （29874015） Guangdong Provincial Natural Science Foundation （980581） and the Foundation for University Key Teacher by the Ministry of Education.

摘要/Abstract

摘要： 提出了对成型中固体输送段聚合物进行计算机层析图像测量的新方法．该方法综合运用核物理学、光电子学、高分子物理、计算机技术和数学知识通过γ-射线的光子流与聚合物原子、聚合物链段相互作用所产生的光电效应、康普顿效应和电子对效应来图像化地测量固体输送段的聚合物形态．实验结果表明利用该方法不仅能对处于密闭空间的聚合物形态进行非破坏性在线测量而且可以推导出固体输送段聚合物形态与其性能的关系．

关键词: 图像测量, 计算机层析, 挤出理论, 聚合物形态

Abstract: This paper presents the image measurement and analysis method with computed tomography for polymer in solid conveying．It utilizes the knowledge of nuclear physicsphoto-electricitypolymer physicscomputer technology and mathematics syntheticallythe polymer morphology in solid conveying can be visually obtained by the interaction of polymer atom or polymer chain and the photon beam caused by γ-rayin which the photoemissionCompton effect and electron pair effect will be generated．The experimental results indicate the method can not only measure the deformation and morphology of polymer in the way of non-opennon-destroy and on-linebut also find the relationship between the morphology and the mechanical properties of polymer in solid conveying．

Key words: image measurement, computed tomography, extrusion theory, polymer morphology

李礼夫王博. 成型中固体输送段聚合物的计算机层析测量[J]. 华南理工大学学报(自然科学版), 2003, 31(3): 6-10.

Li Li-fu Wang Bo. Polymer Measurement in Solid Conveying with Computed Tomography[J]. Journal of South China University of Technology(Natural Science Edition), 2003, 31(3): 6-10.