华南理工大学学报(自然科学版) ›› 2013, Vol. 41 ›› Issue (5): 87-92.doi: 10.3969/j.issn.1000-565X.2013.05.014

• 动力与电气工程 • 上一篇    下一篇

蒸汽发生器二回路过冷沸腾的数值模拟

张小英 丁斐 陈佳跃   

  1. 华南理工大学 电力学院,广东 广州 510640
  • 收稿日期:2012-05-18 修回日期:2013-01-21 出版日期:2013-05-25 发布日期:2013-04-01
  • 通信作者: 张小英(1973-),女,教授,主要从事核电安全技术与理论研究. E-mail:zxy1119@scut.edu.cn
  • 作者简介:张小英(1973-),女,教授,主要从事核电安全技术与理论研究.
  • 基金资助:

    国家自然科学基金资助项目( 10702020, 51176052) ; 广东省科技攻关项目( 2009B010900020) ; 华南理工大学中央高校基本科研业务费专项资金资助项目( 2009ZM0279) ; 亚热带建筑科学国家重点实验室开放课题( 2010KB24)

Numerical Simulation of Subcooled Boiling in Secondary Circuit of Steam Generator

Zhang Xiao-ying Ding Fei Chen Jia-yue   

  1. School of Electric Power,South China University of Technology,Guangzhou 510640,Guangdong,China
  • Received:2012-05-18 Revised:2013-01-21 Online:2013-05-25 Published:2013-04-01
  • Contact: 张小英(1973-),女,教授,主要从事核电安全技术与理论研究. E-mail:zxy1119@scut.edu.cn
  • About author:张小英(1973-),女,教授,主要从事核电安全技术与理论研究.
  • Supported by:

    国家自然科学基金资助项目( 10702020, 51176052) ; 广东省科技攻关项目( 2009B010900020) ; 华南理工大学中央高校基本科研业务费专项资金资助项目( 2009ZM0279) ; 亚热带建筑科学国家重点实验室开放课题( 2010KB24)

摘要: 为深入研究核电蒸汽发生器二回路侧汽液两相的沸腾传热和流动特性,采用RPI 模型对过冷沸腾区域壁面的热流分配进行划分,以此修正CFD 程序中的两流体模型,并利用文献中的实验结果验证了修正后模型的适定性.最后以大亚湾压水堆核电站为例,采用该模型对蒸汽发生器内二回路预热段单元通道内的过冷沸腾进行计算,获得了通道内流体空泡份额、速度、温度、热流量分配等的分布情况.

关键词: 蒸汽发生器, 二回路, 过冷沸腾, 两流体模型, 数值模拟

Abstract:

In order to deeply investigate the vapor-liquid two-phase boiling heat transfer and flow characteristics inthe secondary circuit of steam generator,the wall heat flux partition in the subcooled boiling region was divided byusing the RPI model for revising the two-fluid model of the CFD ( Computational Fluid Dynamics) program,andsome published experimental results were used to validate the reliability of the revised mode.Moreover,a casestudy on the steam generator of Daya Bay PWR ( Pressurized Water Reactor) nuclear power plant was carried out,in which the subcooled boiling in the preheating part of the secondary circuit was computed with the revised model,and the distributions of fluid void fraction,speed,temperature and heat flux partition in the preheating part were allobtained.

Key words: steam generator, secondary circuit, subcooled boiling, two-fluid model, numerical simulation

中图分类号: