Journal of South China University of Technology(Natural Science) >
Intelligent Method for Identifying Damage of Steel Members with Localized Random Pitting Based on Convolutional Neural Network
Received date: 2023-11-01
Online published: 2024-06-12
Supported by
the Key Program of the National Key Research and Development Program of China(2020YFD1100403);the Project of Shanghai Science and Technology Plan(20DZ2253000)
Pitting induced by the marine environment has a significant impact on the safety of steel structures and its form exhibits a strong multi-scale and multi-parameter randomness. In order to effectively detect and identify damage in actual engineering, this paper systematically investigates local random pitting of steel members via experimental study, numerical simulation, and theoretical analysis based on convolutional neural networks. Firstly, under the premise of following the distribution model of pitting corrosion pit depth and the time-varying model of pitting corrosion pit diameter, the boundary and cross restrictions were imposed on the position distribution of corrosion pits using multi-parameter local random pitting numerical model. Python was utilized to generate randomness in the size, location, and number of pits, allowing Abaqus to generate a large number of finite element models of steel plates with varying rust locations and rust rates, and the mode shape samples of each finite element model were obtained. Then, the finite element model was used as a test prototype, and a large number of samples of the first six-order vibration patterns obtained from numerical tests were used to train a convolutional neural network model for identifying damage location. The accuracy of the model was verified using the finite element data set. Finally, the vibration results of the ruler test were used to further verify the accuracy of the convolutional neural network model. The study shows that the model fully considers the randomness of pitting corrosion in aspects such as shape parameters and position coordinates. The parameters are reasonable, close to the actual pitting corrosion situation in reality, and the recognition accuracy is relatively high. In numerical tests, the model achieved 95.9% accuracy in identifying pitting damage to the real area and its adjacent areas, and 81.2% accuracy in full-scale tests, meeting the requirements for the practical intelligent application of identifying steel component damage.
QIANG Xuhong , TIAN Weixiao , JIANG Xu , ZHAO Bosen . Intelligent Method for Identifying Damage of Steel Members with Localized Random Pitting Based on Convolutional Neural Network[J]. Journal of South China University of Technology(Natural Science), 2024 , 52(11) : 43 -54 . DOI: 10.12141/j.issn.1000-565X.230685
| 1 | 罗立胜，陈志华 ．锈蚀钢构件时变可靠度的重要抽样法研究［J］．工业建筑，2019，49（8）：1-5，107． |
| LUO Lisheng， CHEN Zhihua ．Time-dependent reliability analysis of corroded steel members based on the important sampling method［J］．Industrial Construction，2019，49（8）：1-5，107. | |
| 2 | 罗立胜，陈志华，赵小龙，等 ．大气腐蚀环境下钢构件抗力退化模型［J］．结构工程师，2019，35（2）：52-58. |
| LUO Lisheng， CHEN Zhihua， ZHAO Xiaolong，et al ．Deterioration model for resistance of steel member in atmospheric environment［J］．Structural Engineers，2019，35（2）：52-58. | |
| 3 | BHANDARI J， KHAN F， ABBASSI R，et al ．Modelling of pitting corrosion in marine and offshore steel structures—a technical review［J］．Journal of Loss Prevention in the Process Industries，2015，37：39-62. |
| 4 | WANG Y， WHARTON J A， SHENOI R A ．Ultimate strength analysis of aged steel-plated structures exposed to marine corrosion damage：a review［J］．Corrosion Science，2014， 86：42-60. |
| 5 | PIDAPARTI R M， PALAKAL P J， FANG L ．Cellular automation approach to model aircraft corrosion pit damage growth［J］．AIAA Journal，2004，42（12）：2562-2569. |
| 6 | 张新燕 ．腐蚀坑对圆棒构件应力集中及腐蚀疲劳寿命的影响研究［D］．兰州：兰州理工大学，2013. |
| 7 | Standard Guide for Examination and Evaluation of Pitting Corrosion： ［S］． |
| 8 | 王波，袁迎曙，李富民，等 ．氯盐锈蚀钢筋的屈服强度退化分析及其概率模型［J］．建筑材料学报，2011，14（5）：597-603. |
| WANG Bo， YUAN Ying-shu， LI Fu-min，et al ．Deterioration analysis of yield strength and its probabilistic model of steel bar corroded by chloride［J］．Journal of Building Materials，2011，14（5）：597-603. | |
| 9 | 王雪飞，郭耀杰，孙云，等 ．随机点蚀对Q460等边角钢抗拉性能的影响［J］．科学技术与工程，2021，21（12）：4882-4890. |
| WANG Xue-fei， GUO Yao-jie， SUN Yun，et al ．Effect of random pitting corrosion on the tensile properties of Q460 equilateral angle steel［J］．Science Technology and Engineering，2021，21（12）：4882-4890. | |
| 10 | ZHANG X Z， LIU R， CHEN K Y，et al ．Pitting Corrosion characterization of wrought stellite alloys in green death solution with immersion test and extreme value analysis model［J］．Journal of Materials Engineering and Performance，2014，23（5）：1718-1725. |
| 11 | 梁彩凤，侯文泰 ．钢的大气腐蚀预测［J］．中国腐蚀与防护学报，2006，26（3）：129-135. |
| LIANG Caifeng， HOU Wentai ．Prediction of atmospheric corrosion for steels［J］．Journal of Chinese Society for Corrosion and Protection，2006，26（3）：129-135. | |
| 12 | RIVAS D， CALEYO F， VALOR A，et al ．Extreme value analysis applied to pitting corrosion experiments in low carbon steel：comparison of block maxima and peak over threshold approaches［J］．Corrosion Science，2008，50（11）：3193-3204. |
| 13 | OSSAI C I， BOSWELL B， DAVIES I ．Markov chain modelling for time evolution of internal pitting corrosion distribution of oil and gas pipelines［J］．Engineering Failure Analysis，2016，60：209-228. |
| 14 | MELCHERS R E ．Pitting corrosion of mild steel in marine immersion environment-Part 2：Variability of maximum pit depth［J］．Corrosion，2004，60（10）：937-944. |
| 15 | 王燕舞，吴晓源，张雨华，等 ．船舶结构钢海洋环境点蚀模型研究之二：实船蚀坑形态与径深比时变模型［J］．船舶力学，2007，11（5）：735-743． |
| WANG Yan-wu， WU Xiao-yuan， ZHANG Yu-hua，et al ．Pitting corrosion model of mild and low-alloy steel in marine environment—part 2：the shape of corrosion pits［J］．Journal of Ship Mechanics，2007，11（5）：735-743. | |
| 16 | CAWLEY P， ADAMS R D ．Assessment of large engineering structures using data collected during in-service loading［J］．Journal of Strain Analysis for Engineering Design，1979，14（2）：49-57. |
| 17 | CREED S ．Assessment of large engineering structures using data collected during in-service loading［M］．London：Butterworths，1987. |
| 18 | SALAWU O S ．Detection of structural damage through changes in frequency：A review［J］．Engineering Structures，1997，19（9）：718-723. |
| 19 | 万小朋，李小聪，鲍凯，等 ．利用振型变化进行结构损伤诊断的研究［J］．航空学报，2003，39（5）：422-426. |
| WAN Xiao-peng， LI Xiao-cong， BAO Kai，et al ．Structure damage diagnosis based on analyzing changes of vibration mode［J］．Acta Aeronautica et Astronautica Sinica，2003，39（5）：422-426. | |
| 20 | PANDEY A K， BISWAS M， SAMMAN M M.Damage detection from changes in curvature mode shapes［J］．Journal of Sound and Vibration，1991，145（2）：321-332. |
| 21 | RATCLIFFE C P ．Damage detection using a modified Laplacian operator on mode shape data［J］．Journal of Sound and Vibration，1997，204（3）：505-517. |
| 22 | SHI Z Y， LAW S S， ZHANG L M ．Structural damage localization from modal strain energy change［J］．Journal of Sound and Vibration，1998，218（5）：825-844. |
| 23 | 史治宇，罗绍湘，张令弥 ．结构破损定位的单元模态应变能变化率法［J］．振动工程学报，1998，12（3）：109-113. |
| SHI Zhiyu， LUO Shaoxiang， ZHANG Lingmi ．Determination of structural damage location based on element modal strain energy change［J］．Journal of Vibration Engineering，1998，12（3）：109-113. | |
| 24 | 姚南，张天申，王元清，等 ．在役桥梁钢结构的损伤检测与安全评估［C］∥第八届全国现代结构工程学术研讨会．天津：天津大学，2008：1638-1645. |
| 25 | 任克亮，吕国志，张有宏 ．腐蚀结构分析中腐蚀坑的随机布置和计算机模拟［J］．航空学报，2006，42（3）：459-462. |
| REN Ke-liang， Guo-zhi Lü， ZHANG You-hong ．Stochastic arrange and computer simulation of corrosion pitting in damage structure［J］．Astronautica Sinica，2006，42（3）：459-462． | |
| 26 | 王海权 ．基于模态的网架结构损伤识别模糊系统研究［D］．北京：北京建筑大学，2021. |
| 27 | 滕志强 ．基于卷积神经网络与振动信号的结构损伤识别［D］．广州：广东工业大学，2021. |
/
| 〈 |
|
〉 |