Journal of South China University of Technology(Natural Science) >

2024 , Vol. 52 >Issue 11: 21 - 31

DOI: https://doi.org/10.12141/j.issn.1000-565X.240059

Architecture & Civil Engineering

Multi-Factor Model of Plastic Development Coefficient and Strength Calculation for Rectangular Concrete-Filled Steel Tube Members Under Pure Bending

  • PANG Mulin ,
  • XIE Weiwei ,
  • YANG Lufeng
Expand
  • 1.School of Civil Engineering & Architecture/Key Laboratory of Disaster Prevention and Structural Safety of the Ministry of Education，Guangxi University，Nanning 530004，Guangxi，China
    2.Guangxi Road & Bridge Engineering;Group Co. ，Ltd. ，Nanning 530011，Guangxi，China
庞木林（1994—），男，博士生，主要从事工程结构安全性分析与设计研究。E-mail:957604200@qq.com

Received date: 2024-02-05

  Online published: 2024-05-11

Supported by

the Key Program of National Natural Science Foundation of China(51738004);the Guangxi Major Science and Technology Project(AA23062022);the Guangxi Key Research and Development Plan(AB20297028)

Fold

Abstract

The constraint effect of rectangular steel pipe on core concrete has special characteristics, and the accurate prediction of the plastic development capacity of bending members can effectively ensure the load-bearing safety. In order to improve the calculation accuracy of the sectional strength of rectangular CFST members under pure bending, this study established a multi-factor model of plastic development coefficient and an improved bending strength model based on the confinement coefficient and further considering the influence of height-width ratio and steel ratio. First of all, based on the unified theory of CFST members, the change law of plastic development coefficient of rectangular concrete-filled steel tube was studied and compared with the current standard calculation formula. Then, combined with the specification and engineering needs, 2 160 numerical simulation components of rectangular CFST members under pure bending were constructed and the refined analysis of the fiber model method was conducted using the improved constitutive relationship and component failure criterion. The influence of width-thickness ratio, height-width ratio, steel ratio and strength ratio on plasticity development coefficient was investigated to determine that the height-width ratio and steel ratio are the main factors influencing the plasticity development coefficient, and the function expressions related to the height-width ratio and steel ratio were fitted through regression analysis. Thus the multi-factor model of plasticity development coefficient and strength calculation of rectangular CFST members under pure bending were established. Finally, the bending strength improvement model was verified against the main design specifications at home and abroad by using the 128 sets of experimental data collected. The results show that the established multi-factor model of plasticity development coefficient overcomes the defects of the current specification that the calculation model is not accurate enough, and it can more accurately reflect the plasticity development capacity of rectangular CFST members under pure bending. The established improvement model of the bending strength of rectangular CFST members under pure bending solved for the ratio of the ultimate load carrying capacity to the experimental value has a mean value of 0.971 and a root-mean-square error of 0.118, indicating a good match and a higher calculation accuracy.

Key words： rectangular concrete-filled steel tube; plasticity development coefficient; bending strength; fiber model method

Cite this article

PANG Mulin , XIE Weiwei , YANG Lufeng . Multi-Factor Model of Plastic Development Coefficient and Strength Calculation for Rectangular Concrete-Filled Steel Tube Members Under Pure Bending[J]. Journal of South China University of Technology(Natural Science), 2024 , 52(11) : 21 -31 . DOI: 10.12141/j.issn.1000-565X.240059

References

1 钟善桐 ．钢管混凝土统一理论——研究与应用［M］．北京：清华大学出版社，2006.
2 陈宝春，韦建刚，周俊，等 ．我国钢管混凝土拱桥应用现状与展望［J］．土木工程学报，2017，50（6）：50-61.
  CHEN Baochun， WEI Jiangang， ZHOU Jun，et al ．Application of concrete-filled steel tube arch bridges in China：current status and prospects［J］．China Civil Engineering Journal，2017，50（6）：50-61.
3 Specification for structural steel buildings：ANIS/AI ［S］．
4 Eurocode 4：design of composite steel and concrete structures：part 1-1：general rules and rules for buildings： ［S］．
5 Recommendations for design and construction of concrete filled steel tubular structures：AIJ ［S］．
6 Steel，concrete and composite bridges，part 5：code of practice for design of composite bridges： ［S］．
7 钟善桐 ．钢管混凝土结构［M］．3版．北京：清华大学出版社，2003.
8 解威威 ．钢管混凝土结构极限承载力分析的高效高精度线弹性迭代方法［D］．南宁：广西大学，2018.
9 钢管混凝土结构技术规范： ［S］．
10 钢管混凝土结构技术规程： ［S］．
11 HAN L H ．Flexural behaviour of concrete-filled steel tubes［J］．Journal of Constructional Steel Research，2004，60（2）：313-337.
12 GHO W M， LIU D L ．Flexural behaviour of high-strength rectangular concrete-filled steel hollow sections［J］．Journal of Constructional Steel Research，2004，60（11）：1681-1696.
13 LI G C， LIU D， YANG Z J，et al ．Flexural behavior of high strength concrete filled high strength square steel tube［J］．Journal of Constructional Steel Research，2017，128：732-744.
14 JAVED M F， SULONG N H R， MEMON S A，et al ．FE modelling of the flexural behaviour of square and rectangular steel tubes filled with normal and high strength concrete［J］．Thin-Walled Structures，2017，119：470-481.
15 杨有福，韩林海 ．矩形钢管混凝土构件抗弯力学性能的试验研究［J］．地震工程与工程振动，2001，21（3）：41-48.
  YANG You-fu， HAN Lin-hai ．Experimental studies on behavior of concrete-filled RHS members subjected to pure bending［J］．Earthquake Engineering and Engineering Vibration，2001，21（3）：41-48.
16 唐广青，肖岩，张倚天 ．方钢管混凝土轴压短柱承载力与全曲线综述研究［J］．工程力学，2015，32（8）：103-111.
  TANG Guang-qing， XIAO Yan， ZHANG Yi-tian ．Study of bearing capacity and complete stress-stain curves for concrete filled square steel tube columns［J］．Engineering Mechanics，2015，32（8）：103-111.
17 吴乃森，刘雪冬，赵艳艳，等 ．方矩形钢管混凝土抗弯性能研究及规范对比［J］．河北工程大学学报（自然科学版），2012，29（4）：20-23.
  WU Naisen， LIU Xuedong， ZHAO Yanyan，et al ．Experimental investigation and code comparison on flexural bearing capacity of concrete-filled rectangular steel tubes［J］．Journal of Hebei University of Engineering （Natural Science Edition），2012，29（4）：20-23.
18 LIANG Q Q ．Performance-based analysis of concrete-filled steel tubular beam-columns，part I：theory and algorithms［J］．Journal of Constructional Steel Research，2009，65（2）：363-372.
19 HAN L H， LU H， YAO G H，et al ．Further study on the flexural behaviour of concrete-filled steel tubes［J］．Journal of Constructional Steel Research，2006，62（6）：554-565.
20 杨绿峰，解威威，戎艳，等 ．矩形钢管混凝土受弯构件材料本构关系与失效判据研究［J］．土木工程学报，2019，52（1）：60-70.
  YANG Lufeng， XIE Weiwei， RONG Yan，et al ．Constitutive relations and failure criterion for rectangular concrete-filled steel tube members under pure bending［J］．China Civil Engineering Journal，2019，52（1）：60-70.
21 矩形钢管混凝土结构技术规程： ［S］．
22 TOMII M， SAKINO K ．Elasto-plastic behaviour of concrete filled square steel tubular beam-columns［J］．Transactions of the Architectural Institute of Japan，1979（280）：111-120.
23 LU Y Q， KENNEDY D J L ．The flexural behavior of concrete-filled hollow structural sections［J］．Canadian Journal of Civil Engineering，1994，21（1）：111-130.
24 李斌，闻洋 ．矩形钢管混凝土梁受弯性能试验研究［J］．建筑结构，2010，40（6）：51-52，80.
  LI Bin， WEN Yang ．Study on mechanical properties of concrete-filled rectangular steel tube beams［J］．Building Structure，2010，40（6）：51-52，80.
25 郭兰慧，张素梅，王玉银 ．方形、矩形钢管高强混凝土受弯构件的理论分析与试验研究［J］．钢结构，2002，17（6）：29-33.
  GUO Lanhui， ZHANG Sumei， WANG Yuyin ．Experimental research and theoretical analysis on flexural behavior of high-strength concrete-filled square and rectangular steel tubes［J］．Steel Construction，2002，17（6）：29-33.
26 UY B ．Strength of concrete filled steel box columns incorporating local bucking［J］．Journal of Structural Engineering，2000，126（3）：341-352.
27 UY B ．Strength of short concrete filled high strength steel box columns［J］．Journal of Constructional Steel Research，2001，57（2）：113-134.
28 SOUNDARARAJAN A， SHANMUGASUNDARAM K ．Flexural behaviour of concrete-filled steel hollow sections beams［J］．Journal of Civil Engineering & Management，2008，14（2）：107-114.
29 XIONG M X， XIONG D X， LIEW J Y R ．Flexural performance of concrete filled tubes with high tensile steel and ultra-high strength concrete［J］．Journal of Constructional Steel Research，2017，132：191-202.
30 WANG W H， HAN L H， LI W，et al ．Behavior of concrete-filled steel tubular stub columns and beams using dune sand as part of fine aggregate［J］．Construction & Building Materials，2014，51（1）：352-363.
31 AL-SHAAR A A M， GOGUS M T ．Flexural behavior of lightweight concrete and self-compacting concrete-filled steel tube beams［J］．Journal of Constructional Steel Research，2018，149：153-164.
32 JIANG A Y， CHEN J， JIN W L ．Experimental investigation and design of thin-walled concrete-filled steel tubes subject to bending［J］．Thin-Walled Structures，2013，63：44-50.
33 钢结构设计标准： ［S］．
34 混凝土结构设计规范： ［S］．
Options
Outlines

/

〈 〉