Mechanical Engineering

Design and Analysis of the Active-Passive Hybrid Ankle Prosthesis Based on Electro-Hydraulic Actuation

  • PANG Hao ,
  • SHAN Shaopeng ,
  • HAN Yang ,
  • LI Zhennan ,
  • ZHANG Sen ,
  • LIU Chunbao
Expand
  • 1.School of Mechanical and Aerospace Engineering,Jilin University,Changchun 130022,Jilin,China
    2.Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130022,Jilin,China
    3.Key Laboratory of Bionic Engineering,Ministry of Education,Jilin University,Changchun 130022,Jilin,China
庞浩(1993—),男,博士,助理研究员,主要从事仿生健康及服务机器人研究。E-mail:panghao@jlu.edu.cn
刘春宝(1979—),男,博士,教授,主要从事仿生健康及服务机器人研究。

Received date: 2023-09-08

  Online published: 2023-12-28

Supported by

the National Natural Science Foundation of China(52075216)

Abstract

Wearing ankle prosthesis is an important means for patients with below-knee amputations to restore walking ability. The lower limb prostheses are divided into passive prostheses and power prostheses according to whether it can actively output torque. Power prostheses are further divided into active prostheses and active-passive hybrid prostheses. Passive ankle prostheses cannot provide active torque and have limited application scenarios. Powered ankle prostheses can output active torque, but it has the problem of incompatibility between low passive friction and high active transmission ratio. To improve the performance and adaptability of ankle prosthesis, this research proposed a new configuration of active-passive hybrid ankle prosthesis based on the principle of electro-hydraulic actuation from the perspective of practical application. Firstly, based on the analysis of the angle and torque of the human ankle joint, it designed the driving system of the ankle prosthesis and proposed the overall design scheme of the active-passive hybrid ankle prosthesis. Then, the mathematical model of the prosthesis system was established, the rationality of the prosthesis system was verified by the simulation analysis of the hydraulic system of the prosthesis, and the principle prototype of the prosthesis was developed. Finally, the performance of the prosthesis was verified by bench test and human walking experiment. The test results show that the maximum active output torque of the prosthetic ankle joint is 28 N·m when the walking speed is 1.0 m/s (close to the average walking speed of adults). The research results show that the active-passive hybrid ankle prosthesis proposed in this research can realize the active assist function in the human walking process, and can better fit the human ankle movement posture, enhance the wearing adaptability, and further reduce the volume and mass of the prosthetic. The work in this research provides a design idea and reference for the research of dynamic lower limb prosthesis.

Cite this article

PANG Hao , SHAN Shaopeng , HAN Yang , LI Zhennan , ZHANG Sen , LIU Chunbao . Design and Analysis of the Active-Passive Hybrid Ankle Prosthesis Based on Electro-Hydraulic Actuation[J]. Journal of South China University of Technology(Natural Science), 2024 , 52(9) : 72 -80 . DOI: 10.12141/j.issn.1000-565X.230567

References

1 赵燕潮 .中国残联发布我国最新残疾人口数据[J].残疾人研究20123(1):11.
  ZHAO Yan-chao .The China disabled persons’ federation released the latest data on China’s disabled population[J].Disability Studies20123(1):11.
2 STEVENS P M, RHEINSTEIN J C, WURDEMAN S R .Prosthetic foot selection for individuals with lower-limb amputation:a clinical practice guideline[J].JPO Journal of Prosthetics & Orthotics201830(4):175-180.
3 JO G, SANDER D B, LOUIS F,et al .Guidelines and recommendations to investigate the efficacy of a lower-limb prosthetic device:a systematic review[J].IEEE Transactions on Medical Robotics and Bionics20191(4):279-296.
4 沈凌,喻洪流 .国内外假肢的发展历程[J].中国组织工程研究20125(13):2451-2454
  SHEN Ling, YU Hong-Liu .The development of prosthetics at home and abroad[J].Chinese Tissue Engineering Research20125(13):2451-2454.
5 SCHLAFLY M, REED K B .Novel passive ankle-foot prosthesis mimics able-bodied ankle angles and ground reaction forces[J].Clinical Biomechanics202072(11):202-210.
6 AMIRREZA N, MAJID M M, MOHAMMAD G,et al .A novel adjustable damper design for a hybrid passive ankle prosthesis[J].Actuators20209(3):74.
7 De P K, SERRIEND B, BAEYENS J,et al .Prosthetic gait of unilateral lower-limb amputees with current and novel prostheses:a pilot study[J].Clinical Biomechanics202071(5):59-67.
8 COLLINS S H, KUO A D .Recycling energy to restore impaired ankle function during human walking[J].PLoS One20105(2):1-6.
9 LECHLER K, FROSSARD B, WHELAN L,et al .Motorized biomechatronic upper and lower limb prostheses-clinically relevant outcomes[J].PM & R201810(2):S207-S219.
10 GABERT L, HOOD S, TRAN M,et al .A compact,lightweight robotic ankle-foot prosthesis:featuring a powered polycentric design[J].IEEE Robotics & Automation Magazine202027(1):87-102.
11 RINO V, GERLINDE L, GEORGES V P,et al .A biomechanical transtibial prosthesis powered by pleated pneumatic artificial muscles[J].International Journal of Modelling,Identification and Control,20084(4):394-404.
12 YU T, PLUMMER A, IRAVANI P,et al .The design,analysis and testing of a compact electrohydrostatic powered ankle prosthesis[C]∥Proceeding of the Fluid Power Systems Technology.[S.l.]:American Society of Mechanical Engineers,2016.
13 王兴坚,李如飞,林长宏,等 .基于电静液作动原理的主动式踝关节假肢设计[J].液压与气动2019(1):26-31.
  WANG Xing-jian, LI Ru-fei, LIN Chang-hong,et al .Design of active ankle prosthesis based on electro-hydrostatic actuation[J].Chinese Hydraulics&Pneumatics2019(1):26-31.
14 THOMAS S, SIEGMAR B, ROLF J .Energy expenditure and biomechanical characteristics of lower limb amputee gait:the influence of prosthetic alignment and different prosthetic components[J].Gait & Posture200216(3):255-263.
15 MICHAEL L P .Sagittal plane characterization of normal human ankle function across a range of walking gait speeds[J].Biotechnology Progress199925(6):1819-1825.
16 TIAN X Y, WANG S P, WANG X J,et al .Design and control of a compliant electro-hydrostatic-powered ankle prosthesis[J].IEEE/ASME Transactions on Mechatronics202227(5):2429-2439
Outlines

/