Energy, Power & Electrical Engineering

State Switching Control Method for Direct-Drive Wave Power Generation System 

  • YANG Jin-Ming ,
  • HUANG Wei
Expand
  • School of Electric Power,South China University of Technology,Guangzhou 510640,Guangdong,China
杨金明 ( 1962-) ,男,教授,主要从事能源与动力系统中电力电子及其控制技术研究。

Received date: 2019-11-13

  Revised date: 2020-06-06

  Online published: 2020-06-28

Supported by

Supported by the Production-Study-Research Cooperation Project of Ministry of Education & Guangdong Province ( 2013B090500089)

Abstract

Based on the research of the power capture optimization method for the direct-drive wave power generation system,a state switching control method based on a linear generator was proposed in this paper. Based on the characteristic that the speed of the linear generator in the no-load state is higher than that in the power generation state,the linear generator is controlled to switch between the no-load state and the power generation state,thereby increasing the speed of the linear generator in the power generation state. Therefore,the captured power is further improved. The results show that,compared with other power capture optimization methods,the proposed method has excellent performance in power capture.

Cite this article

YANG Jin-Ming , HUANG Wei . State Switching Control Method for Direct-Drive Wave Power Generation System [J]. Journal of South China University of Technology(Natural Science), 2021 , 49(2) : 1 -8 . DOI: 10.12141/j.issn.1000-565X.190833

Outlines

/