Traffic & Transportation Engineering

Influence of Parked Car Ventilation Parameters on Driver Compartment Cooling after Hot Soak

Expand
  • State Key Laboratory of Automotive Simulation and Control,Jilin University,Changchun 130022,Jilin,China
郭鹏(1987-),男,博士生,主要从事空气动力学研究。

Received date: 2018-10-11

  Revised date: 2019-10-11

  Online published: 2020-02-01

Supported by

Supported by the National Natural Science Foundation of China ( 51875238)

Abstract

The relevant parameters in the process of parking ventilation were studied to obtain the parameters that are helpful to enhance the effect of parking ventilation. Firstly,a model experiment was used to verify the accuracy of hot soak and ventilation cooling simulation. Then,under the conditions of model experiment,the cabin hot soak and ventilation process was simulated,and the driver compartment cooling effects under different parked car venti- lation parameters were compared. The results show that,after hot soak,the cooling effect is obvious in the first 3 minutes,and the increase of air volume is helpful for cooling,but the effect is not obvious when the air speed exceeds 250 m3 /h. In addition,adjusting the air volume distribution ratio and increasing the air flow with upward deflection can enhance the cooling effect.

Cite this article

GUO Peng, HU Xingjun, GAO Hao, et al . Influence of Parked Car Ventilation Parameters on Driver Compartment Cooling after Hot Soak[J]. Journal of South China University of Technology(Natural Science), 2020 , 48(2) : 76 -83 . DOI: 10.12141/j.issn.1000-565X.180507

Outlines

/