Journal of South China University of Technology(Natural Science) >

2019 , Vol. 47 >Issue 10: 81 - 92

DOI: https://doi.org/10.12141/j.issn.1000-565X.180597

Architecture & Civil Engineering

Stress Analysis of Continuously Welded Rail of Ballastless Tracks on Simply Supported Girder Bridges with Different Spans

Expand
  •  1． School of Civil Engineering，Central South University，Changsha 410083，Hunan，China;  2． National Engineering Laboratory for High Speed Railway Construction，Central South University，Changsha 410083，Hunan，China
戴公连( 1964-) ，男，教授，主要从事大跨度桥梁极限承载力研究．

Received date: 2018-11-29

  Revised date: 2019-05-16

  Online published: 2019-09-01

Supported by

Supported by the National Natural Science Foundation of China( 51708560) and the Key Issues of the China Railway Corporation( U1334203) 

Fold

Abstract

Based on the principle of bridgetrack interaction，the formula of multispan simply supported bridgetrack interaction considering nonlinear resistance was deduced and compared with the finite element ( FE) method to research the continuously welded rail ( CWR) stress of different ballastless tracks on multispan simply supported girder bridges． Different ballastless track models on simply supported girder bridges with standard span of 32m were established，and the rail additional stress distribution and its stable maximum value were analyzed considering the coupled effect of measured temperature and brake flexural force． Meanwhile， the influences of structural parameters such as span number of simply supported bridges，pier top stiffness and fastener resistance on the stress of CWR were also discussed． The results show that for girder bridges with standard span of 32m， the rail maximum additional stress tends to remain unchanged with the increase of the number of the bridge span，and the unchanged value is less than the norm limit; for the simply supported bridge with ballastless track，its span number is not limited by the rail additional stress; for the unitslab and double-block ballastless track， the change of pier stiffness has little effect on the rail additional stress when the pier top stiffness is greater than 2000kN/cm． Small resistance fasteners
are not recommended for ballastless track on multispan simply supported bridge． 

Key words： simply supported girder bridge; ballastless track; continuously welded rail; bridgetrack interaction; rail additional stress; span number; pier top stiffness． 

Cite this article

DAI Gonglian GE Hao ZHENG Rongrong CHEN Guorong . Stress Analysis of Continuously Welded Rail of Ballastless Tracks on Simply Supported Girder Bridges with Different Spans[J]. Journal of South China University of Technology(Natural Science), 2019 , 47(10) : 81 -92 . DOI: 10.12141/j.issn.1000-565X.180597

References

 
Options
Outlines

/

〈 〉