Mechanical Engineering

Double-Pulse Multi-Phase Coordinative Control System of High-Power Twin-Wire GMAW

Expand
  • School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China
吴开源(1978-) ,男,博士,副研究员,主要从事弧焊逆变电源及其数字化智能控制研究.

Received date: 2015-06-17

  Revised date: 2015-07-15

  Online published: 2016-01-04

Supported by

Supported by the National Natural Science Foundation of China( 51205136) , the Specialized Research Fund for the Doctoral Program of Higher Education of China ( 20100172120003 ) and the Competitive Allocation Project Special Fund of Guangdong Province Chinese Academy of Sciences Comprehensive Strategic Cooperation( 2013B091500082)

Abstract

In order to improve the forming quality of welding seam during the high-power twin-wire GMAW ( Gas Metal Arc Welding) ,a double-pulse waveform control method is proposed.The proposed method adopts the PWM ( Pulse Width Modulation) modules integrated in DSP ( Digital Signal Processor) to implement the direct digital control of PWM signals for the parallel master and the slave power supply in a software mode,so that the corresponding double-pulse waveform modulation is further achieved.Moreover,a double-pulse multi-phase coordinative control system is developed by using the I /O communication of DSP,and the coordinative control of synchronous,alternate and independent phase outputs of two pulses for high-power twin-wire GMAW is realized.Test results demonstrate that the developed double-pulse multi-phase coordinative control system meets the design requirements well and helps to achieve stable welding with decreased twin-arc interference,little splash and perfect welding seam with scaly appearance.

Cite this article

WU Kai-yuan LIANG Zhuo-yong HE Zu-wei HUANG Xi CHENG Jia . Double-Pulse Multi-Phase Coordinative Control System of High-Power Twin-Wire GMAW[J]. Journal of South China University of Technology(Natural Science), 2016 , 44(2) : 40 -45 . DOI: 10.3969/j.issn.1000-565X.2016.02.007

Outlines

/