Journal of South China University of Technology(Natural Science) >

2015 , Vol. 43 >Issue 7: 8 - 13

DOI: https://doi.org/10.3969/j.issn.1000-565X.2015.07.002

Materials Science & Technology

Visualization of Solid Polymer Deformation in Vane Extruder and Its Influence Factors

Expand
  • National Engineering Research Center of Novel Equipment for Polymer Processing//Key Laboratory of Polymer Processing Engineering of the Ministry of Education,South China University of Technology,Guangzhou 510640,Guangdong,China
刘环裕( 1989-) ，男，博士，主要从事聚合物成型装备研究． E-mail: liuhuanyu1989@163.com

Received date: 2014-10-13

  Revised date: 2014-12-11

  Online published: 2015-06-03

Supported by

Supported by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China ( 2009BAI84B06,2011BAE15B02)

Fold

Abstract

The solid polymer deformation was observed on-line by using an assembled vane extruder,and then the effects of material properties,pellet size and process parameters on the deformation were investigated.The results show that (1) polymer pellets are deformed under the compaction of VPCU;(2) the solid polymer of a higher modulus experiences a larger plastic deformation;(3) big polymer pellets are turned into small slices after extrusion by VPCU is done,while small pellets experience a big deformation and then form bonded structure;and (4) the solid polymer deformation decreases with the rise of temperature as well as with the decrease of rotor speeds.

Key words： vane extruder; polymers; deformation; visualization

Cite this article

Liu Huan-yu Zhang Gui-zhen Chen Jia-jia Qu Jin-ping . Visualization of Solid Polymer Deformation in Vane Extruder and Its Influence Factors[J]. Journal of South China University of Technology(Natural Science), 2015 , 43(7) : 8 -13 . DOI: 10.3969/j.issn.1000-565X.2015.07.002

Options
Outlines

/

〈 〉