Decoupling Control of Hyper- Redundant Shaking Table Based on Dynamic Coupling Model

Expand
  • School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,Heilongjiang,China
魏巍(1987-),男,博士生,主要从事多轴振动台、并联机器人的控制研究

Received date: 2013-12-20

  Revised date: 2014-02-20

  Online published: 2014-03-03

Supported by

国家自然科学基金资助项目(51205077)

Abstract

During the operation of hyper- redundant shaking table under loads,the mass matrix in the dynamic modelbecomes non- diagonal due to the existence of eccentric load,which may result in the dynamic coupling among vari-ous degrees of freedom (DOF). In order to solve this problem,a dynamic model of hyper- redundant shaking table,which includes a nonlinear model of the hydraulic system and a mechanical coupling model based on the analysis ofspace force systems,is constructed.Then,a coupling force observer based on the coupling model is introduced tothe DOF control structure.Moreover,the coupling force is regarded as a disturbance force loaded on the hydraulicsystem and is controlled by distributing it to each actuator through Jacobi matrix transformation.Finally,a feedfor-ward compensation control strategy of disturbance force is given based on the linear analysis of the hydraulic sys-tem.Simulated results indicate that the proposed decoupling control strategy for hyper- redundant shaking table iseffective in reducing the coupling among various degrees of freedom.

Cite this article

Wei Wei Yang Zhi- dong Han Jun- wei . Decoupling Control of Hyper- Redundant Shaking Table Based on Dynamic Coupling Model[J]. Journal of South China University of Technology(Natural Science), 2014 , 42(4) : 124 -130 . DOI: 10.3969/j.issn.1000-565X.2014.04.019

Outlines

/