Power & Electrical Engineering

Modeling of Conductor Type Selection for Wind Power Branch Considering Operation Mode of Wind Power Farm

Expand
  • 1.Guangdong Key Laboratory of Clean Energy Technology,South China University of Technology,Guangzhou 510640,Guangdong,China; 2.Planning and Development Department,Guangxi Power Grid Corporation,Nanning 530000,Guangxi,China
张勇军(1973-),男,教授,博士生导师,主要从事电力系统无功优化和电压稳定、电力系统可靠性与规划等研究.

Received date: 2013-07-17

  Revised date: 2013-12-05

  Online published: 2014-03-03

Supported by

国家 “863” 计划项目(20121AA050201)

Abstract

In this paper,first,a stochastic model of wind power farm is constructed,and the influence of the windpower farm on the voltage and power flow of the power distribution network is analyzed.Then,the wind powerbranch and its parallel by- pass are both defined and simulated,and the transmission power of lines affected by thewind power farm is analyzed.Moreover,a mathematical model for conductor type selection,which takes into ac-count the power transmission capacity of both large- scale power grids and wind power farms,is put forward.Withthe help of this model,general laws of conductor type selection for wind power farms with different wind power ca-pacities in different integration positions are revealed,thus successfully implementing the selection and assignmentof overhead lines under the influence of wind power.Analytical results of examples show that the proposed methodis effective.

Cite this article

Zhang Yong- jun Liu Lun Bai Xian- hong . Modeling of Conductor Type Selection for Wind Power Branch Considering Operation Mode of Wind Power Farm[J]. Journal of South China University of Technology(Natural Science), 2014 , 42(4) : 1 -6 . DOI: 10.3969/j.issn.1000-565X.2014.04.001

Outlines

/