Journal of South China University of Technology (Natural Science Edition) ›› 2013, Vol. 41 ›› Issue (10): 7-12,19.doi: 10.3969/j.issn.1000-565X.2013.10.002
• Chemistry & Chemical Engineering • Previous Articles Next Articles
Chen Gang Chen Qing- xia
Received:
Revised:
Online:
Published:
Contact:
About author:
Supported by:
国家 “973” 计划项目(2010CB732206);教育部新世纪人才支持计划项目(D08001Ⅲ)
Abstract:
In the investigation,the wood fibers from butterfly eucalyptus were oxidized in the 2,2,6,6- tetrameth-ylpiperidine-1- oxyradical (TEMPO) / NaBr/ NaClO oxidization system,and the morphologies and properties of the wood fibers before and after oxidation were characterized by using a fiber quality analyzer (FS300),a dynamic drainage jar (DDJ) and an optical microscope.Then,the oxidized fibers were used to prepare the transparent pa-per,and the effects of the NaClO dosage on the paper properties were discussed.The results show that (1) the in-crease of the NaClO dosage with constant TEMPO and NaBr dosages causes an average fiber length decrease of 0.38mm,an average fiber width increase of 4.7μm,a fine fiber content increase of 8 times and a fiber curl value decrease of 13.9 percentage points as well as a poor pulp drainage property; and (2) as compared with the transparent paper from the wood fibers without the TEMPO treatment,that with the TEMPO treatment achieves a higher tensile strength and a greater elastic modulus with a 5 times tensile index,a 7 times elastic modulus and a 27.0% surface roughness as well as a transparency of 87%.
Key words: TEMPO oxidation system, eucalyptus pulp, transparent paper, transparency, surface roughness.ten-sile index, elastic modulus
CLC Number:
TS721
Chen Gang Chen Qing- xia. Properties of TEMPO- Oxidized Wood Fiber and Its Effects on Paper Properties[J]. Journal of South China University of Technology (Natural Science Edition), 2013, 41(10): 7-12,19.
0 / / Recommend
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
URL: https://zrb.bjb.scut.edu.cn/EN/10.3969/j.issn.1000-565X.2013.10.002
https://zrb.bjb.scut.edu.cn/EN/Y2013/V41/I10/7