[1] |
XU Qianjin, MA Shangjun, NIU Maodong, et al.
Dynamic Load Distribution of Roller Thread Considering Gear Pair Meshing Excitation
[J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(11): 119-130.
|
[2] |
ZHOU Jianxing, ZHANG Ronghua, ZENG Qunfeng, et al.
Dynamic Wear Characteristics of Tooth Profile of RV Reducer for Industrial Robot
[J]. Journal of South China University of Technology(Natural Science Edition), 2023, 51(1): 22-30.
|
[3] |
MO Haijun, ZHAO Hang, CHENG Yu, et al.
Normal Contact Stiffness Model of Fine Particle Shot Peening Gear
[J]. Journal of South China University of Technology(Natural Science Edition), 2022, 50(9): 90-98.
|
[4] |
JIANG Jinke FANG Zongde .
Design and Analysis for Actively Modified Gear with Zero Amplitude of Loaded Transmission Error
[J]. Journal of South China University of Technology(Natural Science Edition), 2022, 50(9): 99-108.
|
[5] |
GONG Jingyi, YANG Long, LIU Geng, et al.
Quasi-Static Contact Characteristics of Double Gearboxes with Coupling Misalignment
[J]. Journal of South China University of Technology(Natural Science Edition), 2022, 50(10): 114-123.
|
[6] |
WANG Yanzhong, XU Zichun, MA Tao, et al.
Analysis of Lubrication and Friction Characteristics for
Modified Herringbone Gear
[J]. Journal of South China University of Technology (Natural Science Edition), 2021, 49(1): 93-102.
|
[7] |
JIANG Jinke LIU Zhao PENG Xianlong.
Optimization Design of Vibration Reduction for Hypoid Gears with Ease-Off Flank Modification
[J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(5): 134-141,148.
|
[8] |
WANG Yanzhong, YANG Kai, QI Ronghua, et al.
Similarity Model for Lubrication Experiment of Spiral Bevel Gear and Influencing Parameters
[J]. Journal of South China University of Technology (Natural Science Edition), 2020, 48(1): 25-31.
|
[9] |
LI Junyang, WANG Bo, WANG Jiaxu, et al.
Influence of Structural Parameters of Rigid-Flexible Composite Gears on its Dynamic Characteristics
[J]. Journal of South China University of Technology (Natural Science Edition), 2019, 47(12): 9-16.
|
[10] |
LU Longsheng ZHANG Feixiang WAN Zhenping TANG Yong.
Cycloidal Gear Tooth Profile Modification of RV Reducer Based on Backlash-Optimized
[J]. Journal of South China University of Technology (Natural Science Edition), 2018, 46(9): 1-8.
|
[11] |
ZENG Qingdun HUANG Jiaxing RONG Liangwan .
Flow Analysis and Optimization for Non-Circular Gear Pump on the Basis of Numerical Simulation
[J]. Journal of South China University of Technology (Natural Science Edition), 2018, 46(2): 1-7.
|
[12] |
LIU Chang SHI Wankai HAN Zhenhua XU Lang .
Machining Method of Composite Cycloid Gear Based on the Kinematic Control of Shaping Cutter
[J]. Journal of South China University of Technology (Natural Science Edition), 2018, 46(2): 31-37.
|
[13] |
ZHANG Jiange LIU Shaojun FANG Te .
Prediction of Gear Wear Rate in Mixed Lubrication and Experimental Verification
[J]. Journal of South China University of Technology (Natural Science Edition), 2018, 46(2): 22-30.
|
[14] |
CHEN Yang-zhi CHEN Han-fei.
A Method to Construct Precise Geometric Model of Teeth Profile of Arbitrary Intersecting Line Gear
[J]. Journal of South China University of Technology (Natural Science Edition), 2017, 45(9): 12-18.
|
[15] |
REN Ya-feng CHANG Shan LIU Geng WU Li-yan ZHAO Chen-qing CHANG Le-hao.
Vibration Analysis of Gear-Housing-Foundation Coupled System
[J]. Journal of South China University of Technology (Natural Science Edition), 2017, 45(5): 38-44.
|