华南理工大学学报(自然科学版) ›› 2016, Vol. 44 ›› Issue (8): 98-105.doi: 10.3969/j.issn.1000-565X.2016.08.015

• 交通与运输工程 • 上一篇    下一篇

多聚磷酸改性沥青高温评价性能指标研究

刘红瑛 徐金枝 张振兴 常睿 郝培文   

  1. 长安大学 道路结构与材料交通行业重点实验室,陕西 西安 710064
  • 收稿日期:2015-12-24 修回日期:2016-03-14 出版日期:2016-08-25 发布日期:2016-07-04
  • 通信作者: 郝培文( 1967-) ,男,博士,教授,主要从事路面材料与结构研究. E-mail:haopw@yahoo.com.cn
  • 作者简介:刘红瑛( 1971-) ,女,博士,副教授,主要从事路面材料与结构研究. E-mail: gli71@ gl. chd. edu. cn
  • 基金资助:
    国家自然科学基金资助项目( 51278060)

Investigation into High Temperature Evaluation Indexes of Polyphosphoric Acid-Modified Asphalt

LIU Hong-ying XU Jin-zhi ZHANG Zhen-xing CHANG Rui HAO Pei-wen   

  1. Key Laboratory of Road Structure and Material of MOC,Chang'an University,Xi'an 710064,Shaanxi,China
  • Received:2015-12-24 Revised:2016-03-14 Online:2016-08-25 Published:2016-07-04
  • Contact: 郝培文( 1967-) ,男,博士,教授,主要从事路面材料与结构研究. E-mail:haopw@yahoo.com.cn
  • About author:刘红瑛( 1971-) ,女,博士,副教授,主要从事路面材料与结构研究. E-mail: gli71@ gl. chd. edu. cn
  • Supported by:
    Supported by the National Natural Science Foundation of China( 51278060)

摘要: 针对不同多聚磷酸改性沥青胶结料进行了常规高温性能试验和Superpave 高温性能试验,得到了不同的高温性能评价指标,并对比分析了沥青胶结料高温性能评价指标之间的关系. 采用改进后的车辙试验验证了沥青混合料的高温性能,研究了沥青胶结料与混合料高温性能之间的相关性. 通过差示扫描量热法( DSC) 试验分析了多聚磷酸改性沥青以及SBS 复配多聚磷酸改性沥青的改性机理. 结果表明: 软化点和累积应变可以较准确地评价不同类型沥青胶结料的高温性能; 掺加多聚磷酸可以减小基质沥青和SBS 改性沥青的热流率,从而改善基质沥青和SBS 改性沥青的热稳定性; 累积应变可作为高弹改性沥青胶结料的较合理评价指标.

关键词: 道路工程, 多聚磷酸, 改性沥青, 累积应变

Abstract: The conventional high temperature performance test and the Superpave high temperature performance test were carried out by using different modified asphalt binders,thus achieving different high temperature performance indexes.Then,the relationships between the indexes were discussed.Moreover,the high temperature performance of asphalt mixtures was verified by the improved rutting test,and the correlation between the high temperature performance of the asphalt binder and that of the asphalt mixture was investigated.Finally,the modification mechanisms of the polyphosphoric acid ( PPA) -modified asphalt and the SBS compound PPA-modified asphalt were analyzed by means of DSC.The results show that ( 1) the softening point and the accumulated strain can evaluate the high temperature performance of different types of asphalt binders more accurately; ( 2) the addition of PPA can decrease the heat flow rates of both the matrix asphalt and the SBS-modified asphalt,thus improving their thermal stability; and ( 3) the cumulative strain can be used as a reasonable evaluation index of high elastic modified asphalt binder.

Key words: road engineering, polyphosphoric acid, modified asphalt, cumulative strain

中图分类号: