华南理工大学学报(自然科学版) ›› 2017, Vol. 45 ›› Issue (1): 123-128.doi: 10.3969/j.issn.1000-565X.2017.01.018

• 机械工程 • 上一篇    下一篇

基于杨氏理论的微型换热器传热壁面表面特性分析

周建阳1 罗小平1 冯振飞1,2 邓聪1 吴迪1   

  1. 1. 华南理工大学 机械与汽车工程学院,广东 广州 510640; 2. 广西大学 化学化工学院,广西 南宁 530004
  • 收稿日期:2016-01-18 修回日期:2016-09-14 出版日期:2017-01-25 发布日期:2016-12-01
  • 通信作者: 周建阳( 1986-) ,男,博士生,讲师,主要从事微尺度相变传热研究. E-mail:369398611@qq.com
  • 作者简介:周建阳( 1986-) ,男,博士生,讲师,主要从事微尺度相变传热研究.
  • 基金资助:

    国家自然科学基金资助项目( 21276090)

Analysis of Heat Transfer Channel Surface Characteristic of Micro Heat Exchanger Based on Young's Theory

ZHOU Jian-yang1 LUO Xiao-ping1 FENG Zhen-fei1,2 DENG Cong1 WU Di1   

  1. 1.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China; 2.School of Chemistry and Chemical Engineering,Guangxi University,Nanning 530004,Guangxi,China
  • Received:2016-01-18 Revised:2016-09-14 Online:2017-01-25 Published:2016-12-01
  • Contact: 周建阳( 1986-) ,男,博士生,讲师,主要从事微尺度相变传热研究. E-mail:369398611@qq.com
  • About author:周建阳( 1986-) ,男,博士生,讲师,主要从事微尺度相变传热研究.
  • Supported by:
    Supported by the National Natural Science Foundation of China( 21276090)

摘要: 微型换热器换热通道壁面的表面特性对流体流动沸腾特性有显著的影响.固体表面能常被用来表征微型换热器换热通道壁面的表面特性,可为微细通道中流体流动沸
腾特性的研究提供理论依据; 文中测量去离子水、乙二醇、甲酰胺在换热通道内侧左右壁面及底表面所形成的接触角,基于杨氏理论计算微型换热器换热壁面的表面能,并通过液滴的Wenzel 模型分析微槽道内、外表面接触角差异形成的机理.研究结果表明: 微型换热器换热通道内侧左、右壁面的表面能分别为5. 2、5. 6 MJ /m2,底表面的表面能为8. 2 MJ /m2,微细通道内表面特性差异是由表面粗糙度不同造成的.

关键词: 微型换热器, 表面特性, 表面能, 杨氏理论, Wenzel 液滴模型

Abstract:

The surface characteristic of the heat transfer channel of micro heat exchangers has a significant effect on the flow boiling performance of fluid.Solid surface energy is often used to describe the surface characteristics of the heat transfer channel,which can provide a theoretical basis for the research of the flow boiling performance of the fluid in micro-channels.In the investigation,the contact angles of deionized water,ethylene glycol and formamide with the left,right and bottom surfaces of the heat transfer channel were measured respectively,and the solid surface energy of the heat transfer channel was calculated on the basis of Young's theory.Then,the forming mechanism of the contact angle difference between the inside and outside surfaces of the micro-channels was analyzed through the Wenzel model of droplet.The results show that the solid surface energy of the left,right and bottom surfaces of the heat transfer channel are respectively 5.2,5.6 and 8.2MJ /m2,and the surface roughness difference causes the inside surface features to be different.

Key words: micro heat exchanger, surface characteristic, surface energy, Young's theory, Wenzel droplet model

中图分类号: