基于磁场强度的锅炉管内氧化皮测量精度实验

华南理工大学学报(自然科学版) ›› 2012, Vol. 40 ›› Issue (2): 136-141.

基于磁场强度的锅炉管内氧化皮测量精度实验

刘定平崔志鹏

华南理工大学电力学院，广东广州 510640

收稿日期:2011-08-05 出版日期:2012-02-25 发布日期:2012-01-04
通信作者: 刘定平(1965-) ，男，副教授，主要从事大型火电机组的安全运行和经济运行研究． E-mail:dpliu@ scut.edu.cn
作者简介:刘定平(1965-) ，男，副教授，主要从事大型火电机组的安全运行和经济运行研究．
基金资助:
广东省科技计划项目( 2010B090400111) ; 2010 国家大学生创新性实验计划( 101056131) ; 2010 广东省大学生创新实验项目( 51010561101)

Experimental Investigation into Measurement Accuracy of Oxide Scale in Boiler Tube Based on Magnetic Field Intensity

Liu Ding-ping Cui Zhi-peng

School of Electric Power,South China University of Technology,Guangzhou 510640,Guangdong,China

Received:2011-08-05 Online:2012-02-25 Published:2012-01-04
Contact: 刘定平(1965-) ，男，副教授，主要从事大型火电机组的安全运行和经济运行研究． E-mail:dpliu@ scut.edu.cn
About author:刘定平(1965-) ，男，副教授，主要从事大型火电机组的安全运行和经济运行研究．
Supported by:
广东省科技计划项目( 2010B090400111) ; 2010 国家大学生创新性实验计划( 101056131) ; 2010 广东省大学生创新实验项目( 51010561101)

摘要/Abstract

摘要： 因高温高压蒸汽作用，超临界电站锅炉受热管内易形成氧化皮，氧化皮的剥落会堵塞管道，发生超温爆管。提前探测氧化皮的状况并采取相应措施对预防爆管十分必要．文中在比较几种氧化皮探测方法的基础上，应用磁场检测法，通过实验研究了探头与管道的间隙、探头与管径的偏角、永磁体相对氧化皮的位置等因素对磁场探测结果的影响，发现间隙小于1．07mm、角度偏离中法线25．9°内、相对位置在26．4°内时，测量误差可控制在5%的工程误差以下，且探头与管道的间隙是影响磁场测量结果的主要因素; 随着偏角与相对位置的增大，测得的磁场强度呈指数增长．

关键词: 锅炉管道, 氧化皮, 无损检测, 磁场强度, 测量精度

Abstract:

It is easy to form oxide scale on the surface of the stainless steel used in supercritical utility boiler tube under the action of high-temperature and high-pressure steam. As the flake of the scale may jam the boiler tube and lead to overtemperature tube burst,it is necessary to detect the scale and take some measures in advance. In this paper,several detection methods of oxide scale were compared and the magnetic-field measurement accuracy
was experimentally investigated under the conditions of different clearances between the probe and the tube,different deflection angles between the probe and the tube diameter and different relative positions of the permanent magnet and the scale. It is indicated that ( 1) when the clearance,the deflection angle and the relative position are respectively less than 1.07mm,within 25.9° and less than 26.4°,the measurement error can be controlled within 5%; ( 2 ) the clearance between the probe and the tube is the main factor that affects the measurement; and ( 3) the measured magnetic field intensity exponentially increases with the deflection angle and the relative position.

Key words: boiler tube, oxide scale, nondestructive testing, magnetic field intensity, measurement accuracy

中图分类号:

TK730

刘定平崔志鹏. 基于磁场强度的锅炉管内氧化皮测量精度实验[J]. 华南理工大学学报(自然科学版), 2012, 40(2): 136-141.

Liu Ding-ping Cui Zhi-peng. Experimental Investigation into Measurement Accuracy of Oxide Scale in Boiler Tube Based on Magnetic Field Intensity[J]. Journal of South China University of Technology(Natural Science Edition), 2012, 40(2): 136-141.

[1]	戴公连, 陈坤, 葛浩, 等. 钢轨非接触式无损检测技术数值模拟研究[J]. 华南理工大学学报(自然科学版), 2023, 51(4): 44-52.
[2]	张富臣, 李红梅, 赵春田, 等. 应力/激励磁场与力磁效应关联关系研究[J]. 华南理工大学学报(自然科学版), 2022, 50(3): 133-139.
[3]	王红卫高艺帆於秀. 基于三维声强法的吸声系数测量研究[J]. 华南理工大学学报（自然科学版）, 2020, 48(7): 134-142.
[4]	庞林花文桂林. 报废回收汽车零部件再利用的无损检测技术[J]. 华南理工大学学报（自然科学版）, 2014, 42(11): 55-62.
[5]	张肖宁姜旺恒李智朱小刚. 基于无损检测的转运车使用效果评价[J]. 华南理工大学学报（自然科学版）, 2008, 36(6): 62-66,77.