华南理工大学学报(自然科学版) ›› 2009, Vol. 37 ›› Issue (2): 60-64.

• 机械工程 • 上一篇    下一篇

钢/塑齿轮组合行星传动系统的振动特性

段福海 胡青春 李宇玲   

  1. 华南理工大学 机械与汽车工程学院, 广东 广州 510640
  • 收稿日期:2008-06-17 修回日期:2008-09-09 出版日期:2009-02-25 发布日期:2009-02-25
  • 通信作者: 段福海(1979-),男,博士生,主要从事机械动力学研究. E-mail:haifud@163.com
  • 作者简介:段福海(1979-),男,博士生,主要从事机械动力学研究.

Vibration Characteristics of Planetary Transmission System with Compound Steel/Plastic Gears

Duan Fu-hai  Hu Qing-chun  Li Yu-ling   

  1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, Guangdong, China
  • Received:2008-06-17 Revised:2008-09-09 Online:2009-02-25 Published:2009-02-25
  • Contact: 段福海(1979-),男,博士生,主要从事机械动力学研究. E-mail:haifud@163.com
  • About author:段福海(1979-),男,博士生,主要从事机械动力学研究.

摘要: 为了解钢质行星齿轮传动系统引入塑料齿轮后的振动特性,建立了钢/塑齿轮组合行星传动的动力学分析模型和实验模型,对4种钢/塑齿轮组合行星传动系统的振动特性进行了理论分析与实验研究,分析了组合方式对行星传动振动特性的影响.数值仿真与实验研究结果表明:塑料齿轮的引入对行星齿轮传动的振动特性影响很大,显著减小了太阳轮一行星轮和内齿囤一行星轮的啮合动载荷,有效抑制了行星齿轮传动的齿轮啮合频带振动和高频带振动;组合方式对行星齿轮传动的振动特性影响显著,合理地采用钢/塑齿轮组合行星传动结构可以极大地降低啮合动载荷,从而显著地降低传动系统的振动和噪声.

关键词: 塑料齿轮, 行星齿轮传动, 振动特性, 组合方式

Abstract:

In order to reveal the vibration characteristics of the steel planetary transmission system with plastic gears substituting for the steel ones, this paper establishes the dynamic and experimental models of the transmission sys- tem and performs both theoretical analyses and experimental investigation of the vibration characteristics of four transmission systems in different steel/plastic compound modes. Then, the effect of the compound mode on the vi- bration characteristics is discussed. Numerical and experimental results demonstrate that plastic gears dramatically change the vibration characteristics of planetary transmission systems, greatly reduce the dynamic mesh loads on the sun-planet and ring-planet gears, and effectively suppress the gear-meshing sideband vibration and the high-fre- quency vibration of the transmission system. Moreover, it is indicated that the compound mode affects the vibration characteristics significantly, and that a reasonable steel/plastic gear compound may greatly reduce the dynamic mesh load and further reduce the vibration as well as the noise of the transmission system.

Key words: plastic gear, planetary gear transmission, vibration characteristic, compound mode