华南理工大学学报(自然科学版) ›› 2009, Vol. 37 ›› Issue (11): 7-11,21.

• 交通与运输工程 • 上一篇    下一篇

沥青混合料粘弹塑性断裂参数的研究

王端宜1  刘敬辉1  刘宇2   

  1. 1.华南理工大学 道路工程研究所, 广东 广州 510640; 2.哈尔滨工业大学 交通科学与工程学院, 黑龙江 哈尔滨 150090
  • 收稿日期:2008-12-25 修回日期:2009-03-23 出版日期:2009-11-25 发布日期:2009-11-25
  • 通信作者: 王端宜(1962-),男,教授,博士生导师,主要从事道路工程结构和材料研究. E-mail:tcdywang@scut.edu.cn
  • 作者简介:王端宜(1962-),男,教授,博士生导师,主要从事道路工程结构和材料研究.
  • 基金资助:

    国家自然科学基金资助项目(50278037)

Investigation into Viscoelastic-Plastic Fracture Parameters of Asphalt Mixture

Wang Duan-yi1  Liu Jing-hui1  Liu Yu2   

  1. 1. Research Institute of Road Engineering, South China University of Technology, Guangzhou 510640, Guangdong, China; 2. School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, Heilongjiang, China
  • Received:2008-12-25 Revised:2009-03-23 Online:2009-11-25 Published:2009-11-25
  • Contact: 王端宜(1962-),男,教授,博士生导师,主要从事道路工程结构和材料研究. E-mail:tcdywang@scut.edu.cn
  • About author:王端宜(1962-),男,教授,博士生导师,主要从事道路工程结构和材料研究.
  • Supported by:

    国家自然科学基金资助项目(50278037)

摘要: 沥青混合料是一种典型的粘弹塑性材料.文中通过半圆弯拉试验,采用J积分理论和延迟开裂时间评价其延迟开裂性能,测得在不同荷载水平和不同试验温度下沥青混合料的延迟开裂时间,以及不同试验温度下的断裂韧度,研究其裂缝起裂规律.结果表明,裂缝的起裂表现出明显的粘弹塑性特征,采用J积分理论和延迟开裂时间评价沥青混合料的断裂性能时,简单的流变本构关系依然适用.

关键词: 沥青混合料, J积分, 半圆弯拉试验, 断裂韧度, 延迟开裂

Abstract:

Based on the semi-circular bending test, the delayed cracking properties of asphalt mixture, a typical viscoelastic-plastic material, are evaluated using the J-integral theory and the delayed-cracking initiation time. The delayed-cracking initiation time in different loading and temperature conditions as well as the fracture toughness at different testing temperatures is also measured to reveal the rules of crack initiation. The results show that the crack initiation displays obvious viscoelastic-plastic characteristics, and that a simple rheological constitutive model is applicable enough for the evaluation of fracture performance of asphalt mixture using the J-integral theory and the delayed-cracking initiation time.

Key words: asphalt mixture, J-integral, semi-circular bending test, fracture toughness, delayed cracking