华南理工大学学报(自然科学版) ›› 2003, Vol. 31 ›› Issue (10): 55-57.

• • 上一篇    下一篇

一种提取含噪声信号中重叠峰位置的新方法∗ 

张永清1 王立世1 莫金垣2   

  1. 1.华南理工大学 应用化学系‚广东 广州510640;2.中山大学 化学与化学工程学院‚广东 广州510275
  • 出版日期:2003-10-20 发布日期:2022-06-02
  • 作者简介:张永清 (1971-)‚女‚讲师‚博士‚主要从事电分析化学和化学计量学研究.
  • 基金资助:
    国家自然科学基金资助项目(20005003);华南理工大学自然科学基金资助项目

A Novel Method for Determining the Peak Position from Noisy Overlapped Signals ∗

Zhang Y ong-qing 1 Wang L-i shi 1 Mo Jin-yuan 2   

  1. 1.Dept.of Applied Chemistry‚South China Univ.of Tech.‚Guangzhou510640‚China; 2.School of Chemistry and Chemical Engineering‚Zhongshan Univ.‚Guangzhou510275‚China
  • Online:2003-10-20 Published:2022-06-02
  • About author:Zhang Yong - qing (born in 1971)‚female‚lecturer‚Ph.D.‚mainly researches on electroanalysis chemistry and chemometrics
  • Supported by:
    Supported by the National Natural Science Foundation of China(20005003)and the Natural Science Foundation of South China University of Technology

摘要: 以二阶 B-样条小波为分析小波‚提出了一种提取分析化学中含噪声重叠峰位置的新方法———连 续样条小波变换法.在合适的尺度下‚处理后的信号类似于信号的四阶导数.结果表明‚采用连续样条小波变换法 能使峰变窄‚并能提高信号的信噪比‚同时还能从含噪声重叠信号中直接得到重叠峰的数目及其相应的峰位置. 

关键词: 连续样条小波变换, 峰位置, 含噪声重叠信号

Abstract: A new method called continuous spline wavelet transform(CSWT)for determining the peak position of noisy overlapped signals in analytical chemistry was proposed by selecting the second order B-spline wavelet as analyzing wavelet.Under suitable dilation‚the processed signal is similar to the signal obtained by the4th order differential.The results show that the resolution and the signal-to- noise ratio of signal processed by CSWT are enhanced comparing with those of overlapped signal.By CSWT‚one can obtain the number of overlapped peaks and the corresponding peak positions from noisy overlapped signals. 

Key words: continuous spline wavelet transform, peak position, noisy overlapped signal

中图分类号: