华南理工大学学报(自然科学版) ›› 2013, Vol. 41 ›› Issue (7): 50-55.doi: 10.3969/j.issn.1000-565X.2013.07.009

• 机械工程 • 上一篇    下一篇

大功率模块高频驱动器的设计及实验分析

王振民1 张芩2 杜贵平3   

  1. 1.华南理工大学 机械与汽车工程学院,广东 广州 510640; 2.华南理工大学 计算机科学与工程学院,广东 广州 510006;3.华南理工大学 电力学院,广东 广州 510640
  • 收稿日期:2012-08-15 修回日期:2013-03-26 出版日期:2013-07-25 发布日期:2013-06-01
  • 通信作者: 王振民(1974-),男,博士,副教授,主要从事数字化电源及焊接自动化研究 E-mail:wangzhm@scut.edu.cn
  • 作者简介:王振民(1974-),男,博士,副教授,主要从事数字化电源及焊接自动化研究
  • 基金资助:

    国家“863” 计划项目(2012AA110702);国家自然科学基金资助项目(50805051);广东省科技计划项目(2012B091000009);广州市科技支撑计划项目(2010J- D00201);华南理工大学中央高校基本科研业务费专项资金资助项目(2012ZZ0059)

Design and Experimental Analysis of High- Frequency Driver for High- Power Module

Wang Zhen- min1 Zhang Qin2 Du Gui- ping3   

  1. 1.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China;2.School of Computer Science and Engineering,South China University of Technology,Guangzhou 510006,Guangdong,China;3.School of Electric Power,South China University of Technology,Guangzhou 510640,Guangdong,China
  • Received:2012-08-15 Revised:2013-03-26 Online:2013-07-25 Published:2013-06-01
  • Contact: 王振民(1974-),男,博士,副教授,主要从事数字化电源及焊接自动化研究 E-mail:wangzhm@scut.edu.cn
  • About author:王振民(1974-),男,博士,副教授,主要从事数字化电源及焊接自动化研究
  • Supported by:

    国家“863” 计划项目(2012AA110702);国家自然科学基金资助项目(50805051);广东省科技计划项目(2012B091000009);广州市科技支撑计划项目(2010J- D00201);华南理工大学中央高校基本科研业务费专项资金资助项目(2012ZZ0059)

摘要: 针对大功率模块的驱动需求,设计了一种低成本的大功率高频驱动器.基于信号调制型磁隔离调制原理,采用脉冲信号耦合和重构方法实现驱动信号的可靠隔离和双向传递; 采用高隔离型DC/DC 供电模块提高信号隔离效果,降低制造成本; 采用欠饱和检测和盲区时间优化控制来解决功率模块短路/过流的准确检测难题; 通过软关断方式实现过压保护,利用非神经超前保护机制实现快速而有效的保护; 最后,利用大功率移相软开关实验平台,开展了文中设计的驱动器和国外同类先进产品的对比驱动实验.结果表明,所设计的驱动器的驱动能力强,耗能和温升更低,驱动波形好,成本低,能满足大功率模块的高频驱动需求.

关键词: 大功率模块, 高频驱动器, 磁隔离, 信号重构, 非神经超前保护

Abstract:

 In order to meet the drive requirements for high- power modules,a low- cost high- frequency driver is pro-posed.In this driver,based on the magnetic insulation and modulation principle of modulated signals,the pulsesignal coupling and reconstruction methods are adopted to realize the reliable insulation and bi- direction transmi-ssion of driving signals,isolated DC/DC converters are used as the power supply to reduce the manufacturing costand enhance the isolation,the undersaturation detection and the blind- zone time optimization control are employed toprecisely detect short circuit/over current,the soft turn- off method is used to implement the over- voltage protection,and the preflexive mechanism is adopted to realize the fast and reliable protection of power module.Moreover,somedriving experiments on a high- power phase- shifting soft switching platform are carried out to compare the proposeddriver with some other parallel power modules.The results indicate that the proposed driver is of powerful driveenergy,low power consumption and temperature rise,perfect driving waveform and low cost,so that it fulfills thehigh- frequency driving requirement for high- power modules.

Key words: high- power module, high- frequency driver, magnetic insulation, signal reconstruction, preflexive pro-tection

中图分类号: