华南理工大学学报(自然科学版) ›› 2021, Vol. 49 ›› Issue (2): 1-8.doi: 10.12141/j.issn.1000-565X.190833

所属专题: 2021年能源、动力与电气工程

• 能源、动力与电气工程 • 上一篇    下一篇

直驱式波浪发电系统的状态切换控制方法

杨金明 黄伟   

  1. 华南理工大学 电力学院,广东 广州 510640
  • 收稿日期:2019-11-13 修回日期:2020-06-06 出版日期:2021-02-25 发布日期:2021-02-01
  • 通信作者: 杨金明 ( 1962-) ,男,教授,主要从事能源与动力系统中电力电子及其控制技术研究。 E-mail:jmyang@scut.edu.cn
  • 作者简介:杨金明 ( 1962-) ,男,教授,主要从事能源与动力系统中电力电子及其控制技术研究。
  • 基金资助:
    广东省教育部产学研合作项目 ( 2013B090500089)

State Switching Control Method for Direct-Drive Wave Power Generation System 

YANG Jinming HUANG Wei   

  1. School of Electric Power,South China University of Technology,Guangzhou 510640,Guangdong,China
  • Received:2019-11-13 Revised:2020-06-06 Online:2021-02-25 Published:2021-02-01
  • Contact: 杨金明 ( 1962-) ,男,教授,主要从事能源与动力系统中电力电子及其控制技术研究。 E-mail:jmyang@scut.edu.cn
  • About author:杨金明 ( 1962-) ,男,教授,主要从事能源与动力系统中电力电子及其控制技术研究。
  • Supported by:
    Supported by the Production-Study-Research Cooperation Project of Ministry of Education & Guangdong Province ( 2013B090500089)

摘要: 通过对直驱式波浪发电系统的功率捕获优化方法进行研究,文中提出一种基于 直线发电机的状态切换控制方法。即基于直驱式波浪发电系统中直线发电机在空载状态 的速度比发电状态时的速度高的特点,控制直线发电机使其在空载状态和发电状态之间 进行切换,从而提高发电机在发电状态时的运行速度,最终实现捕获功率的进一步提 高。与其他功率捕获优化方法进行对比的结果表明,文中提出的方法在功率捕获上表现 出优异的性能。

关键词: 直驱式波浪发电系统, 功率捕获优化方法, 状态切换控制方法 

Abstract: Based on the research of the power capture optimization method for the direct-drive wave power generation system,a state switching control method based on a linear generator was proposed in this paper. Based on the characteristic that the speed of the linear generator in the no-load state is higher than that in the power generation state,the linear generator is controlled to switch between the no-load state and the power generation state,thereby increasing the speed of the linear generator in the power generation state. Therefore,the captured power is further improved. The results show that,compared with other power capture optimization methods,the proposed method has excellent performance in power capture.

Key words: direct-drive wave power generation system, power capture optimization method, state switching control method

中图分类号: