物理

基于线性时差的回转支承声发射源定位及修正

展开
  • 1.华南理工大学 安全科学与工程研究所,广东 广州 510640; 2.广州市特种机电设备检测研究院,广东 广州 510180
陈国华(1967-),男,博士,教授,主要从事工业安全与风险评价技术及管理信息系统、过程装备安全可靠性及风险评价技术等研究.

收稿日期: 2012-04-28

  修回日期: 2012-10-10

  网络出版日期: 2013-03-01

基金资助

质检公益性行业科研专项( 201110032) ; 广东省安全生产专项( 2012-7)

TDOA-Based Location and Its Correction of Acoustic Emission Source with Slewing Ring

Expand
  • 1.Institute of Safety Science & Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China;2.Guangzhou Academy of Special Equipment Inspection & Testing,Guangzhou 510180,Guangdong,China
陈国华(1967-),男,博士,教授,主要从事工业安全与风险评价技术及管理信息系统、过程装备安全可靠性及风险评价技术等研究.

Received date: 2012-04-28

  Revised date: 2012-10-10

  Online published: 2013-03-01

Supported by

质检公益性行业科研专项( 201110032) ; 广东省安全生产专项( 2012-7)

摘要

利用线性时差定位法实现了回转支承声发射源的粗略定位,但基于阈值的时差估计使定位精度不高.为提高声发射源定位精度,通过构造时差修正信号并计算修正信号的平滑伪Wigner-Ville 分布,得到阈值时差的修正值.结果表明,采用修正后的时差进行声发射源定位可提高定位精度,源定位最大绝对误差从未修正时的23.63 mm 降低到11.57mm.

本文引用格式

陈国华 梁峻 王新华 . 基于线性时差的回转支承声发射源定位及修正[J]. 华南理工大学学报(自然科学版), 2013 , 41(4) : 142 -146 . DOI: 10.3969/j.issn.1000-565X.2013.04.024

Abstract

In this paper,the acoustic emission source with slewing ring is roughly located via a linear time-difference-of-arrival ( TDOA) location method. Then,in order to overcome the low precision resulting from the threshold-based TDOA estimation and improve the location accuracy of acoustic emission source,a correction signal isconstructed,and the corresponding smooth pseudo Wigner-Ville distribution ( SPWD) is calculated to obtain a correctionvalue of the threshold-based TDOA.The results show that the corrected TDOA helps to improve the locationaccuracy of the acoustic emission source with slewing ring,with a maximum absolute error decreasing from 23.63mmto 11.57mm.

文章导航

/