华南理工大学学报(自然科学版) >

2025 , Vol. 53 >Issue 7: 139 - 148

DOI: https://doi.org/10.12141/j.issn.1000-565X.240353

土木建筑工程

复杂环境下复合材料薄柱壳结构的双稳态特性

  • 吴耀鹏 ,
  • 杨泉 ,
  • 刘莹
展开
  • 1.西安建筑科技大学 土木工程学院，陕西 西安 710055
    2.西安建筑科技大学 结构工程与抗震教育部重点实验室，陕西 西安 710055
吴耀鹏（1979 —），男，博士，副教授，主要从事复合材料结构的力学性能研究。E-mail： wyp@xauat.edu.cn

收稿日期: 2024-07-02

  网络出版日期: 2025-02-24

基金资助

陕西省自然科学基础研究计划项目(2023-JC-YB435)

收起

Bistable Behaviors of Composite Thin Cylindrical Shell in Complex Environment

  • WU Yaopeng ,
  • YANG Quan ,
  • LIU Ying
Expand
  • 1.School of Civil Engineering，Xi’an University of Architecture and Technology，Xi’an 710055，Shaanxi，China
    2.Key Lab of Structural Engineering and Earthquake Resistance of Ministry of Education （XAUAT），Xi’an University of Architecture and Technology，Xi’an 710055，Shaanxi，China
吴耀鹏（1979 —），男，博士，副教授，主要从事复合材料结构的力学性能研究。E-mail： wyp@xauat.edu.cn

Received date: 2024-07-02

  Online published: 2025-02-24

Supported by

the Natural Science Basic Research Project of Shaanxi Province(2023-JC-YB435)

Fold

摘要

双稳态复合材料结构是一种新型可展开结构，广泛应用于多个领域。然而在复杂工作环境中，其材料性能可能发生变化，进而影响结构的双稳态特性。结合理论研究和数值研究，建立含热膨胀系数和湿膨胀系数的复合材料薄柱壳结构理论模型，推导复杂环境下薄柱壳应变能的解析表达式。基于最小势能原理，建立了温度和湿度影响的双稳态理论模型，研究预测环境参数对T700/Epoxy、T300/5028 Graphite-Epoxy和AS7/M21碳纤维/环氧树脂复合材料柱壳第2稳态应变能、主曲率和扭曲率的影响。采用ABAQUS软件建立柱壳结构的有限元模型，数值模拟柱壳的双稳态变形过程，得到不同温湿环境下第2稳态应变能、主曲率和扭曲率变化，并将数值结果与理论结果进行对比分析。结果表明：T700/Epoxy、AS7/M21在20~120 ℃以及0.0~1.0%湿度范围内，最大应变能分别最多减少32.7%和9.1%，T300/5028 Graphite-Epoxy柱壳的应变能最大增量为914.6%，T700/Epoxy与T300/5028 Graphite-Epoxy的主曲率对温度敏感性强，最大增量约为17%和14%，而AS7/M21变化不超过5%。在抗扭性能上，T700/Epoxy与T300/5028 Graphite-Epoxy在高温高湿下波动较大，AS7/M21则保持良好稳定性。结合理论研究和数值模拟，高温、高湿对复合材料结构的双稳态性能影响显著。通过定量分析不同温湿条件下复合材料的力学性能，可为双稳态结构的材料选择及应用环境优化提供科学依据，有助于提升结构设计的可靠性和耐久性。

关键词： 双稳态; 复合材料; 柱壳结构; 复杂环境; 曲率

本文引用格式

吴耀鹏 , 杨泉 , 刘莹 . 复杂环境下复合材料薄柱壳结构的双稳态特性[J]. 华南理工大学学报(自然科学版), 2025 , 53(7) : 139 -148 . DOI: 10.12141/j.issn.1000-565X.240353

Abstract

Bistable composite structures are a novel type of deployable structure widely used across various fields. However, in complex service environments, changes in material properties may occur, which can in turn affect the bistable characteristics of the structure. By integrating theoretical and numerical studies, this study established a theoretical model of a composite cylindrical shell structure incorporating thermal and hygrothermal expansion coefficients. And it derived an analytical expression for the strain energy of the cylindrical shell under complex environmental conditions. Based on the principle of minimum potential energy, a bistable theoretical model considering the effects of temperature and humidity was developed. The influence of environmental parameters on the second stable-state strain energy, principal curvature, and twist curvature of cylindrical shells made from T700/Epoxy, T300/5028 Graphite-Epoxy, and AS7/M21 carbon fiber/epoxy composites was investigated. Using ABAQUS software, a finite element model of the cylindrical shell was built to numerically simulate the bistable deformation process, and the variations in second stable-state strain energy, principal curvature, and twist curvature under different temperature and humidity conditions were obtained. The numerical results were compared with the theoretical predictions. The results show that under temperature ranges of 20 ℃ to 120 ℃ and humidity levels from 0.0 to 1.0%, the maximum strain energy decreases by up to 32.7% and 9.1% for T700/Epoxy and AS7/M21, respectively, while the strain energy of T300/5028 Graphite-Epoxy increases by up to 914.6%. The principal curvatures of T700/Epoxy and T300/5028 Graphite-Epoxy show high sensitivity to temperature, with maximum increases of approximately 17% and 14%, respectively, whereas AS7/M21 exhibits variations of less than 5%. In terms of anti-twisting performance, T700/Epoxy and T300/5028 experience significant fluctuations under high temperature and humidity, while AS7/M21 maintains good stability. The combination of theoretical analysis and numerical simulation indicates that high temperature and humidity significantly affect the bistable performance of composite structures. By quantitatively analyzing the mechanical properties of composite materials under different temperature and humidity conditions, a scientific basis can be provided for material selection and environmental optimization of bistable structures, thereby contributing to improved reliability and durability in structural design.

Key words： bistable; composite; cylindrical shell structure; complex environment; curvature

参考文献

[1] DANO M L， HYER M W ．Thermally-induced deformation behavior of unsymmetric laminates［J］．International Journal of Solids and Structures，1998，35（17）：2101-2120.
[2] 丁江，卢蒙恩，曾梓洋，等 ．一种可调谐非线性磁式压电能量采集器［J］．华南理工大学学报（自然科学版），2023，51（9）：30-43，68.
  DING Jiang， LU Mengen， ZENG Ziyang，et al ．A tunable nonlinear magnetic piezoelectric energy harvester［J］．Journal of South China University of Technology （Natural Science Edition），2023，51（9）：30-43，68.
[3] DATON-LOVETT A ．An extendible member：US6217975［P］．2001-04-17.
[4] IQBAL K， PELLEGRINO S， DATON-LOVETT A ．Bi-stable composite slit tubes［C］∥Proceedings of IUTAM-IASS Symposium on Deployable Structures：Theory and Applications．Dordrecht：Springer，2000：153-162.
[5] GALLETLY D A， GUEST S D ．Bistable composite slit tubes（I）：a beam model［J］．International Journal of Solids and Structures，2004，41（16）：4517-4533.
[6] KEBADZE E， GUEST S D， PELLEGRINO S ．Bistable prestressed shell structures［J］．International Journal of Solids and Structures，2004，41（11）：2801-2820.
[7] GUEST S D， PELLEGRINO S ．Analytical models for bistable cylindrical shells［J］．Proceedings of the Royal Society A：Mathematical，Physical and Engineering Science，2006，462（2067）：839-854.
[8] ZHANG Z， WU H， HE X，et al ．The bistable behaviors of carbon-fiber/epoxy anti-symmetric composite shells［J］．Composites Part B：Engineering，2013，47：190-199.
[9] BRAMPTON C J， BETTS D N， BOWEN C R，et al ．Sensitivity of bistable laminates to uncertainties in material properties，geometry and environmental conditions［J］．Composite Structures，2013，102：276-286.
[10] 张焕青，柴国钟，张征，等 ．反对称铺设复合材料圆柱壳双稳态特性的温度影响理论模型与数值分析［J］．机电工程，2018，35（12）：1273-1278，1309.
  ZHANG Huan-qing， CHAI Guo-zhong， ZHANG Zheng，et al ．Theoretical model and numerical analysis of thermal effects on bistable characteristics of anti-symmetrical composite cylindrical shells［J］．Journal of Mechanical ＆ Electrical Engineering，2018，35（12）：1273-1278，1309.
[11] GIDDINGS P F， BOWEN C R， SALO A I T，et al ．Bistable composite laminates：effects of laminate composition on cured shape and response to thermal load［J］．Composite Structures，2010，92（9）：2220-2225.
[12] CHOI H S， AHN K J， J-D NAM，et al ．Hygroscopic aspects of epoxy/carbon fiber composite laminates in aircraft environments［J］．Composites Part A：Applied Science and Manufacturing，2001，32（5）：709-720.
[13] CHILLARA V S C， DAPINO M J ．Mechanically-prestressed bistable composite laminates with weakly coupled equilibrium shapes［J］．Composites Part B：Engineering，2017，111：251-260.
[14] FAZLI M， SADR M H， GHASHOCHI-BARGH H ．Analysis of bi-stable hexagonal composite laminate under thermal load［J］．Applied Composite Materials，2021，28（4）：1067-1087.
[15] 张征，潘豪，叶钢飞，等 ．温度对T700/3234反对称铺设圆柱壳结构的双稳态特性影响［J］．航空材料学报，2016，36（5）：70-76.
  ZHANG Zheng， PAN Hao， YE Gangfei，et al ．Thermal effect on bistable behaviour of T700/3234 anti-symmetric cylindrical shells［J］．Journal of Aeronautical Materials，2016，36（5）：70-76.
[16] ZHANG T J， LI S L， CHANG F，et al ．An experimental and numerical analysis for stiffened composite panel subjected to shear loading in hygrothermal environment［J］．Composite Structures，2016，138：107-115.
[17] FUJIOKA E， YOKOZEKI T， WATANABE A，et al ．Analysis on temperature-dependent deployment behavior of bi-stable composite rods［J］．Advanced Composite Materials，2018，28（3）：245-257.
[18] HYER M W， HERAKOVICH C T， MILKOVICH S M，et al ．Temperature dependence of mechanical and thermal expansion properties of T300/5208 graphite/epoxy［J］．Composites，1983，14（3）：276-280.
[19] ECKSTEIN E， PIRRERA A， WEAVER P M ．Multi-mode morphing using initially curved composite plates［J］．Composite Structures，2014，109：240-245.
Options
文章导航

/

〈 〉


总访问量
今日访问
在线人数
粤ICP备05084312号
版权所有 © 华南理工大学期刊中心（学报编辑部）

地址：广州 五山 华南理工大学17号楼 邮政编码：510640

电话： 020-87111794 邮箱：journal@scut.edu.cn

  • 微信号：Journalscut
  • QQ群：699235083