交通运输工程

沥青混合料骨架细观接触的高通量计算

展开
  • 1.华南理工大学 土木与交通学院, 广东 广州 510640
    2.长安大学 公路学院, 陕西 西安 710064
    3.武汉科技大学 汽车与交通工程学院, 湖北 武汉 430065
唐成(1989-),男,博士生,主要从事路面结构与材料多尺度研究。E-mail:ct_tangcheng@mail.scut.edu.cn

收稿日期: 2022-08-12

  网络出版日期: 2022-11-03

基金资助

广东省自然科学基金资助项目(2019A1515011965)

High-Throughput Calculation for Meso-Contact of Asphalt Mixture Skeleton

Expand
  • 1.School of Civil Engineering and Transportation,South China University of Technology,Guangzhou 510640,Guangdong,China
    2.School of Highway,Chang’an University,Xi’an 710064,Shaanxi,China
    3.School of Automobile and Traffic Engineering,Wuhan University of Science and Technology,Wuhan 430065,Hubei,China
唐成(1989-),男,博士生,主要从事路面结构与材料多尺度研究。E-mail:ct_tangcheng@mail.scut.edu.cn

Received date: 2022-08-12

  Online published: 2022-11-03

Supported by

the Natural Science Foundation of Guangdong Province(2019A1515011965)

摘要

为实现沥青混合料骨架细观接触的高通量计算,首先提出了近邻列表法与改进的窗搜索法两种接触计算方法;然后,使用4种(AC13、AC16、OGFC13及SMA13)沥青混合料对比了两种新方法与遍历法、窗搜索法及iPas软件在计算精度与效率方面的差异,采用虚拟试件研究了可实现计算速度与精度均衡的图像分辨率范围;最后,就高通量计算方法的适用性进行了验证。结果表明:近邻列表法可避免遍历法不可能发生接触集料对的冗余接触计算,改进的窗搜索法通过形态学膨胀处理即可完成传统窗搜索法环扫一周的目的;近邻列表法、遍历法、窗搜索法、改进的窗搜索法及iPas软件尽管计算原理存在差异但具有一致的精度;不同计算方法的计算效率排序为近邻列表法>遍历法>改进的窗搜索法>iPas软件>窗搜索法;图像分辨率的降低会提高接触计算的速度但是会降低接触点计算结果的准确性,综合考虑精度与效率的要求,图像分辨率范围处于0.05~0.075 mm/pixel时可实现计算速度与精度的均衡;近邻列表法能有效地实现沥青混合料骨架细观接触的高通量计算。

本文引用格式

唐成, 王端宜, 贠迪, 等 . 沥青混合料骨架细观接触的高通量计算[J]. 华南理工大学学报(自然科学版), 2023 , 51(4) : 135 -144 . DOI: 10.12141/j.issn.1000-565X.220514

Abstract

In order to realize the high-throughput calculation of meso-contact for asphalt mixture skeleton, this paper firstly put forward two contact calculation methods, the neighbor list method and the improved window search method, and then four asphalt mixtures AC13, AC16, OGFC13 and SMA13 were used to compare the difference in calculation accuracy and efficiency among two new methods and exhaustive method, window search method and iPas software, and the range of image resolution that can achieve the balance of calculation speed and accuracy was investigated using virtual specimens. Finally, the applicability of the high throughput calculation method was verified. The results show that neighbor list method can avoid the redundant contact calculation of contact aggregate pairs with the exhaustive method, and the improved window search method can accomplish the purpose of a one loop sweep of the traditional window search method by morphological expansion processing. Neighbor list method, exhaustive method, window search method, improved window search method and iPas software have the same accuracy although there are differences in calculation principles. The order of computational efficiency of different calculation methods is: neighbor list method > exhaustive method > Improved window search method >iPas software > window search method. The decrease of image resolution will improve the speed of contact calculation but reduce the accuracy of contact point calculation results. Considering the requirements of both accuracy and efficiency, a balance of calculation speed and accuracy can be realized when the image resolution range is 0.05~0.075 mm/pixel. The neighbor list method can effectively realize the high throughput characterization of meso-contact of asphalt mixture skeleton.

参考文献

1 National science and technology council .Materials genome initiative strategic plan[R].Washington DC:Executive Office of the President of the United States,2021.
2 汪洪,向勇,项晓东,等 .材料基因组——材料研发新模式[J].科技导报201533(10):13-19.
  WANG Hong, XIANG Yong, XIANG Xiaodong,et al .Materials genome enables research and development revolution[J].Science & Technology Review201533(10):13-19.
3 谭忆秋,吕慧杰,徐慧宁 .材料基因思想在沥青路面材料领域的应用展望[J].交通运输研究20206(5):2-12.
  TAN Yiqiu, LV Huijie, XU Huining .Application prospect of material genetics idea in asphalt pavement materials[J].Transport Research20206(5):2-12.
4 邢超,谭忆秋,张凯,等 .基于材料基因组方法的沥青混合料基因特性综述及展望[J].中国公路学报202033(10):76-90.
  XING Chao, TAN Yiqiu, ZHANG Kai,et al .Review and prospect of genetic characteristics of asphalt mixture based on material genome method[J].China Journal of Highway and Transport202033(10):76-90.
5 汪洪,项晓东,张澜庭 .数据+人工智能是材料基因工程的核心[J].科技导报201836(14):15-21.
  WANG Hong, XIANG Xiaodong, ZHANG Lanting .Data + AI:the core of materials genomic engineering[J].Science & Technology Review201836(14):15-21.
6 SEFIDMAZGI N R, TASHMAN L, BAHIA H .Internal structure characterization of asphalt mixtures for rutting performance using imaging analysis[J].Road Materials and Pavement Design201213(S1):21-37.
7 石立万,王端宜 .基于数字图像处理的沥青混合料主骨架评价标准[J].中国公路学报201730(5):52-58.
  SHI Liwan, WANG Duanyi .Evaluation indexes of asphalt mixture main skeleton based on digital image processing[J].China Journal of Highway and Transport201730(5):52-58.
8 JIANG J, NI F, DONG Q,et al .Investigation of the internal structure change of two-layer asphalt mixtures during the wheel tracking test based on 2D image analysis[J].Construction and Building Materials2019209:66-76.
9 牛冬瑜,谢希望,牛艳辉,等 .粗集料接触参数对沥青混合料损伤演化的影响[J].中国公路学报202033(10):201-209.
  NIU Dongyu, XIE Xiwang, NIU Yanhui,et al .Influence of contact parameters of coarse aggregate on damage evolution of asphalt mixture[J].China Journal of Highway and Transport202033(10):201-209.
10 COENEN A R, KUTAY M E, SEFIDMAZGI N R,et al .Aggregate structure characterisation of asphalt mixtures using two-dimensional image analysis[J].Road Materials and Pavement Design201213(3):433-454.
11 GAO J, WANG H, BU Y,et al .Effects of coarse aggregate angularity on the microstructure of asphalt mixture[J].Construction and Building Materials2018183:472-484.
12 WANG F, XIAO Y, CUI P,et al .Effect of aggregate morphologies and compaction methods on the skeleton structures in asphalt mixtures[J].Construction and Building Materials2020263:120220.
13 英红,王锦河,张宏,等 .基于图像的AC20型混合料集料接触分布变异性[J].同济大学学报(自然科学版)201139(3):359-364.
  YING Hong, WANG Jinhe, ZHANG Hong,et al .Variation of aggregate contacts distribution in AC20 HMA based on digital image processing[J].Journal of Tongji University(Natural Science)201139(3):359-364.
14 XING C, XU H, TAN Y,et al .Mesostructured property of aggregate disruption in asphalt mixture based on digital image processing method[J].Construction and Building Materials2019200:781-789.
15 马杰贤 .沥青混合料内部几何特征及其细观力学模型的研究[D].广州:华南理工大学,2018.
16 JIN C, WAN X, LIU P,et al .Stability prediction for asphalt mixture based on evolutional characterization of aggregate skeleton[J].Computer‐Aided Civil and Infrastructure Engineering202136(11):1453-1466.
17 段跃华,张肖宁,李红杰,等 .基于CT图像的粗集料颗粒接触特性细观尺度研究[J].建筑材料学报201114(6):808-813.
  DUAN Yuehua, ZHANG Xiaoning, LI Hongjie,et al .Research on contact characteristics of coarse aggregates particles within meso scale by CT images[J].Journal of Building Materials201114(6):808-813.
18 MA T, ZHANG D, ZHANG Y,et al .Micromechanical response of aggregate skeleton within asphalt mixture based on virtual simulation of wheel tracking test[J].Construction and Building Materials2016111:153-163.
19 MIAO Y, YU W, HOU Y,et al .Investigating the functions of particles in packed aggregate blend using a discrete element method[J].Materials201912(4):10.3390/ma12040556.
20 王端宜,黎侃,蔡旭 .基于集料接触特性的沥青混合料抗车辙性能评价[J].华南理工大学学报(自然科学版)201240(11):121-126,154.
  WAND Duan-yi, LI Kan, CAI Xu .Evaluation of Rutting Resistance of Asphalt Mixture Based on Aggregate Contact Characteristics[J].Journal of South China University of Technology (Natural Science Edition)201240(11):121-126,154.
21 英红,周基,吴倩,等 .骨架型沥青混合料粗集料颗粒接触形态变化规律[J].建筑材料学报201619(2):292-299.
  YING Hong, ZHOU Ji, WU Qian,et al .Variation of the contact form of coarse aggregate particles in skeleton type asphalt mixture[J].Journal of Building Materials201619(2):292-299.
22 蔡旭,王端宜,黎侃,等 .基于散体力学的沥青混合料剪切模量预估[J].中国公路学报201326(6):38-46.
  CAI Xu, WANG Duanyi, LI Kan,et al .Prediction of shear modulus of asphalt mixtures based on granular mechanics[J].China Journal of Highway and Transport201326(6):38-46.
23 YANG X, YOU Z, HU J .Three-dimensional finite-element modeling for asphalt concrete using visual cross-sectional imaging and indirect element meshing based on discrete-element models[J].Journal of Materials in Civil Engineering201829(1):04016182.
文章导航

/