动力与电气工程

喷淋蒸发板式冷凝器传热理论分析及实验研究

展开
  • 1.华南理工大学 机械与汽车工程学院,广东 广州 510640; 2.广州市华德工业有限公司,广东 广州 510663
简弃非(1963-),男,教授,博士生导师,主要从事强化传热与节能研究.

收稿日期: 2013-12-02

  修回日期: 2014-03-04

  网络出版日期: 2014-03-03

基金资助

广东省教育部产学研结合项目(2012B091100330)

Theoretical Analysis and Experimental Investigation of Heat Transfer in Spraying Plate- type Evaporative Condenser

Expand
  • 1.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China; 2.Guangzhou Wide Industrial Co.,Ltd.,Guangzhou 510663,Guangdong,China
简弃非(1963-),男,教授,博士生导师,主要从事强化传热与节能研究.

Received date: 2013-12-02

  Revised date: 2014-03-04

  Online published: 2014-03-03

Supported by

广东省教育部产学研结合项目(2012B091100330)

摘要

对喷淋蒸发板式冷凝器的传热性能进行理论分析与实验研究,建立其特性实验系统和模型,着重研究蒸发式冷凝器板外水和空气侧的传热性能,并得出适合喷淋蒸发板式冷凝器的计算关联式,以指导该冷凝器的设计计算和热阻分析.研究表明,湿球温度、板片间距、喷水量和风量均是影响喷淋蒸发板式冷凝器传热性能的主要因素.

本文引用格式

简弃非 任勤 戴晨影 李志明 张勇 . 喷淋蒸发板式冷凝器传热理论分析及实验研究[J]. 华南理工大学学报(自然科学版), 2014 , 42(4) : 45 -51 . DOI: 10.3969/j.issn.1000-565X.2014.04.008

Abstract

Based on the theoretical analysis and experimental investigation of spraying plate- type evaporative con-densers,a performance test system as well as a corresponding model of the condenser was constructed,and the wa-ter- side and the air- side heat transfer performances of the condenser were discussed in detail.Moreover,some cal-culation correlations of the condenser were derived to guide the design and analysis of thermal resistance.It is foundthat wet- bulb temperature,plate spacing,water quantity and wind volume are the main factors that affect the heattransfer performances of spraying- plate evaporative condensers.

文章导航

/