机械工程

基于复合滑移的微纳缝隙剪切流研究

展开
  • 1. 福州大学 机械工程及自动化学院,福建 福州 350108; 2. 福州大学 数学与计算机科学学院,福建 福州 350108
陈晖(1982-),男,博士,副教授,主要从事流体传动与控制、微尺度流动研究.

收稿日期: 2014-01-10

  修回日期: 2014-03-16

  网络出版日期: 2014-06-01

基金资助

国家自然科学基金资助项目( 51305080) ; 福建省自然科学基金资助项目( 2012J05089)

Investigation into Shear Flow in Micro /Nano Gap Based on Complicated Boundary Slip

Expand
  • 1.School of Mechanical Engineering and Automation,Fuzhou University,Fuzhou 350108,Fujian,China;2.College of Mathematics and Computer Science,Fuzhou University,Fuzhou 350108,Fujian,China
陈晖(1982-),男,博士,副教授,主要从事流体传动与控制、微尺度流动研究.

Received date: 2014-01-10

  Revised date: 2014-03-16

  Online published: 2014-06-01

Supported by

国家自然科学基金资助项目( 51305080) ; 福建省自然科学基金资助项目( 2012J05089)

摘要

边界滑移是微流动的关键特征之一,通过改变流道壁面的滑移状态,为微流动控制提供了新的途径. 基于微缝隙下的近壁面滑移效应,结合Navier 滑移边界条件,建立亲疏液复合壁面下二维微缝隙剪切流的精确解模型. 采用计算流体动力学方法进行微流动建模仿真以验证该数学模型的可靠性,在此基础上结合文献中试验测量所得的滑移参数值,针对壁面滑移状态不同的微缝隙,利用该数学模型研究其内部的微流动规律. 结果显示: 伴随着壁面运动的微缝隙滑移流场迅速变化,在毫秒级甚至更短时间内趋向于稳定状态. 疏液型壁面的运动状态对滑移流动影响小,亲液型壁面的静止状态比运动状态对液体具有更强的束缚能力; 在纳米级缝隙中,超亲液静止壁面和超疏液运动壁面结合时,液体将被强力地吸附在亲液壁面上.

本文引用格式

陈晖 沈明 . 基于复合滑移的微纳缝隙剪切流研究[J]. 华南理工大学学报(自然科学版), 2014 , 42(7) : 68 -73 . DOI: 10.3969/j.issn.1000-565X.2014.07.011

Abstract

Boundary slip is one of the key features of micro-flow,and it provides a new way for flow control bychanging the slip status of flow channel.Based on the slip effect adjacent to the wall in the micro-gap and the Navierslip boundary condition,a model of exact solution to the shear flow in the two-dimensional micro-gap with a lyophilicand lyophobic wall is constructed. Then,the reliability of the proposed mathematical model is verified by establishinga simulation model of micro-flow based on the computational fluid dynamics method,and it is used to investigatethe micro-flow laws in the micro-gaps with different slip properties according to the slip parameters obtainedfrom the experimental results in relevant literatures.The results show that ( 1) the slip flow in the micro-gap variesrapidly with the wall movement,and it tends to be steady within milliseconds or below; ( 2) the lyophilic stationarywall is of a stronger adsorption ability to liquid in comparison with the moving one,while the motion status of thelyophobic wall has a small impact on the slip flow; and ( 3) in nano-scale gaps,the integration of the superlyophilicstationary wall with the super-lyophobic moving wall causes a strong adsorption of liquid on the lyophilicwall to occur.

文章导航

/