华南理工大学学报(自然科学版) ›› 2016, Vol. 44 ›› Issue (11): 140-146.doi: 10.3969/j.issn.1000-565X.2016.11.021

• 动力与电气工程 • 上一篇    

用于架空线路载流量计算的实时太阳辐射强度计算模型

刘刚 何耿生 李炀 郝金宝 綦昆仑 唐建林   

  1. 华南理工大学 电力学院,广东 广州 510640
  • 收稿日期:2016-05-12 修回日期:2016-07-06 出版日期:2016-11-25 发布日期:2016-10-04
  • 通信作者: 刘刚( 1969-) ,男,博士,副教授,主要从事电气设备在线监测与故障诊断、过电压及其防护、电力设备外绝缘研究. E-mail:liugang@scut.edu.cn
  • 作者简介:刘刚( 1969-) ,男,博士,副教授,主要从事电气设备在线监测与故障诊断、过电压及其防护、电力设备外绝缘研究.
  • 基金资助:

    国家高技术研究发展计划项目( 2015AA050201) ; 国家大学生创新创业训练项目( 201510561015)

A Real-Time Solar Radiation Intensity Calculation Model for Calculating Transmission Capacity of Overhead Conductor

LIU Gang HE Geng-sheng LI Yang HAO Jin-bao QI Kun-lun TANG Jian-lin   

  1. School of Electric Power,South China University of Technology,Guangzhou 510640,Guangdong,China
  • Received:2016-05-12 Revised:2016-07-06 Online:2016-11-25 Published:2016-10-04
  • Contact: 刘刚( 1969-) ,男,博士,副教授,主要从事电气设备在线监测与故障诊断、过电压及其防护、电力设备外绝缘研究. E-mail:liugang@scut.edu.cn
  • About author:刘刚( 1969-) ,男,博士,副教授,主要从事电气设备在线监测与故障诊断、过电压及其防护、电力设备外绝缘研究.
  • Supported by:

    Supported by the National High-Tech R&D Program of China( 2015AA050201)

摘要: 为了克服架空线路载流量计算时将太阳辐射强度视为定值的缺陷,充分挖掘导线潜在的输送能力,首先以100W/m2 的太阳辐射强度为梯度,讨论了太阳辐射强度取值对不同截面导线载流量计算的影响; 然后,基于大气对太阳辐射的衰减规律,引入辐射衰减系数,建立太阳辐射强度的实时计算模型,该模型可根据不同地区的经纬度以及具体时刻,将太阳辐射强度的计算转化为太阳射线穿过大气层厚度的计算,达到评估某地区实时太阳辐射强度的目的; 最后,结合山西大同地区2012 年的气象监测数据和IEEE 738—2006 提供的方法,对所提模型的准确性进行了检验,发现模型计算的太阳辐射强度与实际测量值基本吻合,最大误差在70 W/m2 以内,且文中方法比IEEE 方法更接近监测数据,更能满足架空线路载流量计算的要求.

关键词: 太阳辐射强度, 架空线, 载流量, 大气厚度, 辐射衰减系数

Abstract:

In order to explore the potential transmission capacity and overcome the defect that solar radiation intensity is regarded as a constant when the transmission capacity of overhead conductors is calculated,by adopting a solar radiation intensity gradient of 100W/m2,the influence of the solar radiation intensity on the transmission capacity of overhead conductors of different kinds of cross-sectional areas is discussed.Then,on the basis of the atmospheric attenuation law of solar radiation and by introducing an attenuation coefficient,a real-time solar radiation evaluation model is constructed.In the model,according to specific time and the longitudes and latitudes of different regions,the problem is converted into another problem of calculating the distance of the solar radiation getting through the atmosphere,thus realizing the purpose of evaluating the real-time solar radiation intensity of a region.Finally,by using the meteorological data of Datong,Shanxi Province in 2012 and the data calculated by the formulas of IEEE 738—2006,the accuracy of the constructed model is verified.It is found that the data calculated by this model can fit the meteorological data well,with a maximum error within 70W/m2,and the fit is better than the data calculated by the formulas of IEEE 738—2006,which means that this model can meet the requirements of calculating the transmission capacity of overhead conductors.

Key words: solar radiation intensity, overhead conductor, transmission capacity, atmospheric depth, radiation attenuation coefficient

中图分类号: