华南理工大学学报(自然科学版) ›› 2013, Vol. 41 ›› Issue (6): 6-10.doi: 10.3969/j.issn.1000-565X.2013.06.002

• 电子、通信与自动控制 • 上一篇    下一篇

基于双面平行带线的三通带滤波器设计

赵小兰 韦岗 章秀银 刘沛杰   

  1. 华南理工大学 电子与信息学院,广东 广州 510640
  • 收稿日期:2012-11-07 修回日期:2013-01-18 出版日期:2013-06-25 发布日期:2013-05-03
  • 通信作者: 赵小兰(1974-),女,博士生,讲师,主要从事无线技术与光通信技术研究 E-mail:gzxll@scut.edu.cn
  • 作者简介:赵小兰(1974-),女,博士生,讲师,主要从事无线技术与光通信技术研究
  • 基金资助:

     NSFC- 广东省自然科学联合基金资助项目(U1035002);国家自然科学基金青年科学基金资助项目(61001055)

Design of Tri- Band Bandpass Filter Based on Double- Sided Parallel Stripline

Zhao Xiao- lan Wei Gang Zhang Xiu- yin Liu Pei- jie   

  1. School of Electronic and Information Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China
  • Received:2012-11-07 Revised:2013-01-18 Online:2013-06-25 Published:2013-05-03
  • Contact: 赵小兰(1974-),女,博士生,讲师,主要从事无线技术与光通信技术研究 E-mail:gzxll@scut.edu.cn
  • About author:赵小兰(1974-),女,博士生,讲师,主要从事无线技术与光通信技术研究
  • Supported by:

     NSFC- 广东省自然科学联合基金资助项目(U1035002);国家自然科学基金青年科学基金资助项目(61001055)

摘要: 为了实现三带通滤波器的小型化、高边缘选择性、通带独立可调以及电路设计简单化,提出了一种具有高选择性的三通带滤波器( BPF) 设计方法.该滤波器基于中间层插入导体平面的双面平行带线,由分别位于顶层和底层的 2 个谐振器组成,并由它们谐振产生 3 个不同的通带, 第 1 和第 3 个通带的频率由顶层的枝节加载型阶跃阻抗谐振器控制,第 2 个通带的频率由底层的半波长谐振器控制; 顶层谐振器采用交叉耦合结构以产生传输零点,提高滤波器的边缘选择性.最后设计加工了一个工作在 2.38、 3.40 和 5.15 GHz的三通带滤波器并进行了实验,实验结果和仿真结果吻合良好,从而验证了文中所提设计方法的有效性.

关键词: 三通带滤波器, 带通滤波器, 双面平行带线, 谐振器

Abstract:

 Proposed in this paper is a novel design method of tri- band bandpass filter (BPF) with compact structure,high skirt selectivity,individually- controlled passbands and simple circuit.The proposed filter,which is based on adouble- sided parallel stripline with an inserted conductor plane in the middle of the substrate,consists of tworesonators respectively located on the top and the bottom layers,which produce three passbands.The frequencies ofthe first and the third passbands are controlled by the stub- loaded stepped- impendence resonators on the top layer,while the frequency of the second passband is controlled by the half- wavelength resonators on the bottom layer.Moreover,transmission zeros are generated by employing a cross coupling structure for the top- layer resonator,thusimproving the skirt selectivity of the filter.Finally,a tri- band filter working at the frequencies of 2.38, 3.40 and5.15GHz is implemented and tested.The tested results accord well with the simulated ones,which means that theproposed design method is effective.

Key words: tri- band bandpass filter, bandpass filter, double- sided parallel stripline, resonator

中图分类号: